INDI-BOY DSP
8Pages

Catalog excerpts

—ME ASURE ME NT & AN AL YT ICS | D AT A SHE ET ABB INDI-BOY DSP Load limitation electronics

INDI-BOY DSP LOAD LIMITATION ELECTRONICS | DS/INDI-BOY-DSP-EN REV. B — Measurement made easy Load limitation with 3 set points and display to be installed on a front panel — Easy and intuitive calibration — Display of hoisted load and input signal — Internal monitoring system of the integrity of the load cell and the load limitation electronic (positive safety) — Available options • 4(0) to 20 mA or 0 to 10 V analog output • RS232, RS485, USB or fieldbus capabilities • NEMA 4X / IP 65 • Rail DIN adaptor • Power supply: 48 V AC (only for 85 to 230 V AC version) • Also available with...

Open the catalog to page 2

INDI-BOY DSP LOAD LIMITATION ELECTRONICS | DS/INDI-BOY-DSP-EN REV. B 3 5 V DC @65 mA max (jumper selectable) IP rating for front

Open the catalog to page 3

INDI-BOY DSP LOAD LIMITATION ELECTRONICS | DS/INDI-BOY-DSP-EN REV. B — Dimensions Model INDI-BOY All dimensions in mm (in) Figure 1: Dimensions model INDI-BOY Figure 2: Other view Note Recommended min. clearance (behind the panel) for mounting is depth 140 mm and height 53.4. Panel cut-out: 92 mm (-0/+0.8), 45 mm (-0/+0.5).

Open the catalog to page 4

INDI-BOY DSP LOAD LIMITATION ELECTRONICS | DS/INDI-BOY-DSP-EN REV. B Model DISP-BOYP All dimensions in mm (in) Figure 3: Dimensions model DISP-BOYP Figure 4: Other view Note Recommended min. clearance (behind the panel) for mounting is depth 140 mm and height 53.4. Panel cut-out: 92 mm (-0/+0.8), 45 mm (-0/+0.5).

Open the catalog to page 5

INDI-BOY DSP LOAD LIMITATION ELECTRONICS | DS/INDI-BOY-DSP-EN REV. B — Option cards Communication cards (max. 1 choice) CARD-CDC10 RS-485 field bus communication interface. Available with crew terminals or DB9 connector CARD-CDC20 RS-232C half-duplex communication interface. Available with crew terminals or DB9 connector CARD-CDC30 DeviceNet communication interface • Modbus communication Profibus DP (EN 50170) communication interface As the CARD-CDC50 is too long for the housing of the CRANE-BOY, the CARD-CDC50-CRANE is supplied with a spacer to be inserted between the front of the...

Open the catalog to page 6

INDI-BOY DSP LOAD LIMITATION ELECTRONICS | DS/INDI-BOY-DSP-EN REV. B

Open the catalog to page 7

ABB Automation GmbH Measurement & Analytics Force Measurement Oberhausener Str. 33 40472 Ratingen Deutschland Tel: +49 2102 12-2520 Fax: +49 2102 12-1414 Email: forcemeasurement@de.abb.com abb.com/measurement We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations...

Open the catalog to page 8

INDI-BOY DSP 8Pages

Catalog excerpts

All ABB Measurement & Analytics catalogs and technical brochures

INDI-BOY DSP
8Pages