EL3060

EL3060

EL3060

Product catalog summary
Overview: The ABB EL3060 series of continuous gas analyzers are designed for hazardous areas, offering explosion protection and compliance with Equipment Protection Level (EPL) Gb standards. These analyzers are suitable for use in Zone 1 and Zone 2 environments with potentially explosive gas atmospheres.
Key Features:
  • Compact Design: The EL3060 series features a compact design with a flameproof enclosure, integrating either a paramagnetic oxygen analyzer or a thermal conductivity analyzer within the control unit.
  • Combinability: The system allows for the combination of oxygen or thermal conductivity analyzers with an infrared photometer, enabling complex measurements with up to five components.
  • Ease of Installation and Operation: The control unit includes a terminal box for safe connection of signal cables, and operation is facilitated through an explosion-proof glass pane with touch-sensitive keys and a multilingual interface.
  • Communication Capabilities: The analyzers support four analog outputs, up to 16 digital inputs and outputs, and interfaces like Modbus and PROFIBUS for easy data integration and visualization.
  • International Certifications: The EL3060 series is certified for use in hazardous areas by ATEX, IECEx, KC, NEPSI, TIIS, and EAC.
Applications:
  • Uras26 Photometer: Suitable for measuring up to four infrared active gases, with applications in chemical, petrochemical, and pharmaceutical industries, among others.
  • Magnos28 Oxygen Analyzer: Utilizes a paramagnetic measurement principle with a new silicon sensor, suitable for rapid concentration changes and long-term stability.
  • Caldos25 and Caldos27 Thermal Conductivity Analyzers: Designed for corrosive applications and fast measurements, respectively, with applications in various industrial sectors.
Innovative Features:
  • Dynamic QR Code: Provides dynamic information on system configuration and health status, enhancing communication and support.
  • Calibration Concepts: Offers time and cost-saving calibration options, including gas-filled calibration cells and single-point calibration with ambient air.
Added Value: ABB provides extensive connectivity options, assured quality through certifications, a wide selection of analyzers, certified service partners, and powerful software solutions for remote control and maintenance.
See more

Catalog excerpts

EL3060-1

Continuous gas analyzers EL3060 The specialists for hazardous areas

 Open the catalog to page 1
EL3060-2

The specialists for hazardous areas ABB Analytics possesses decades of experience in the area of explosion protection. The EL3060 series unifies this competence with the approved measuring technique. The completely flameproof enclosure of the EL3060 is in accordance with all the requirements of Equipment Protection Level (EPL) Gb and can be used, due to its high safety standards, in plants with potentially explosive gas atmospheres in Zone 1 and Zone 2.

 Open the catalog to page 2
EL3060-3

CONTINUOUS GAS ANALYZERS EL3060 THE SPECIALISTS FOR HAZARDOUS AREAS Continuous gas analyzers EL3060 - the advantages to you Compactly built The EL3060 series is built convincingly compact. One device is made up of the flameproof enclosed control unit and one or two analyzers from the successful product line Advance Optima. • Paramagnetic oxygen analyzer or thermal conductivity analyzer - integrated into the housing of the control unit • Infrared photometer - built into a separate flameproof enclosure which is connected to the control unit for data transfer and power supply Easy to combine The...

 Open the catalog to page 3
EL3060-4

— Photometer analyzer and Paramagnetic oxygen analyzer — 01 Application in flue gas measurement The Uras26 is an NDIR photometer suitable for continuous measurement of gases in industrial proces applications. The Uras26 can measure up to four infrared active gases in one analyzer module. The analyzer detectors are filled with gas that corresponds to the desired measuring component. This enables the detectors to provide optimum sensitivity and high selectivity over other gases present in the sample gas mixture, thereby achieving low detection limits. The Magnos28 represents the future of paramagnetic...

 Open the catalog to page 4
EL3060-5

— Thermal conductivity analyzers The Caldos25 is designed for highly corrosive applications. The measuring cell with its glasscoated resistor is especially resistant to corrosive gases. With Caldos25 pressure correction is not required. The measurement signal is completely independent of the sample gas pressure – whether negative or positive. Small measuring ranges and fast measurements are characteristic for the Caldos27 thanks to its silicon sensor. The smallest volumes and the direct coupling to the gas feed path result in extremely short T90 times. The measuring ranges can be freely selected....

 Open the catalog to page 5
EL3060-6

— 01 EL3060 display with Dynamic QR Code — 02 Application in chemical industry — 03 Application in technical process plants Dynamic QR Code ABB’s Dynamic QR Code is a unique feature to display dynamically generated QR codes on the analyzer display for easy communication. In addition to static information for system identification, it contains also dynamic information on system configuration and analyzer health status. In combination with mobile devices, the Dynamic QR Code represents an innovative way of customer’s communication which allows, for instance, improved case-specific support by ABB...

 Open the catalog to page 6
EL3060-7

— The Added Value What you can expect from a market leader As one of the world’s leading suppliers of analyzer technology, we offer our customers additional benefits and services other manufacturers cannot provide. With the added values ABB Analytics helps to improve performance and reliability at work. — 04 Continuous gas analyzers portfolio Best choice of analyzers tailored to your needs We offer the broadest selection of measuring principles under one roof. All types of analyzers share a common operation to reduce the need for training and spare parts. Certified sales and service partners...

 Open the catalog to page 7
EL3060-8

ABB Limited Measurement & Analytics Howard Road, St. Neots Cambridgeshire, PE19 8EU, UK Tel: +44 870 600 6122 Fax: +44 1480 213 339 Email: [email protected] ABB Inc. Measurement & Analytics 125 E. County Line Road Warminster, PA 18974, USA Tel: +1 215 674 6000 Fax: +1 215 674 7183 ABB Automation GmbH Measurement & Analytics Stierstaedter Str. 5 60488 Frankfurt am Main, Germany Tel: +49 69 7930 4666 Email: [email protected] abb.com/analytical © Copyright 2018 ABB. All rights reserved. Specifications subject to change without notice. 3KXG112002R5001

 Open the catalog to page 8

All ABB Measurement & Analytics catalogs and technical brochures

  1. ProKiln GAC400

    24  Pages

  2. AV1 and AV2

    24  Pages

  3. SCK

    20  Pages

  4. INDI-BOY DSP

    8  Pages

  5. 9QGPS4500

    8  Pages

  6. 9QGPS3100P

    12  Pages

  7. 9QGPS2960

    12  Pages

  8. 9QGPS2625

    8  Pages

  9. MB3600-HP10

    5  Pages

  10. MB3600-CH10

    8  Pages

  11. ACF5000

    16  Pages

  12. Magnos28

    10  Pages

  13. HP30

    4  Pages

  14. Aztec ATS430

    12  Pages

  15. LMS200

    12  Pages

  16. PGC5000

    8  Pages

  17. LGR-ICOS 927S

    4  Pages

  18. MR Series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.