ABB Ability™ System 800xA 6.1
118Pages

008 System 800xA Extended Automation 01 010 System 800xA, System Capabilities 01 Lifecycle Management - System Expansion 01 013 Automation Sentinel Program 014 Control System Lifecycle Management Program 015 Automation Sentinel Upgrade Orders 015 System 800xA Base System 017 Subscriber System Tags 021 Control Room Solutions

022 Control Room Prestudy 024 Live Video System 026 Standard Engineering Tools 026 Professional Engineering Tools 030 Control Software Licenses 031 Communication Interface Software Licenses 032 Safety 033 Device Management & Fieldbuses 036 Process Industries Application Libraries 036 Process Control Device Library 036 Process Industries Application Libraries 037 Additional Control Device Library Licenses 037 PCDL Application Engineering

SYSTEM 80 0XA 6.1 PRODUCT CATALOG BUSINESS SYSTEMS Wireless Network Collaboration Table SYSTEM NETWORKS Base System WirelessHART Gateway AC 800M High Integrity Controller Motor Controller System 800xA is not only a DCS (Distributed Control System) it’s also an Electrical Control System, a Safety System and a collaboration enabler with the capacity to improve engineering efficiency, operator performance and asset utilization. Promoting collaboration Collaboration between people and systems is a necessity to increase engineering efficiency, asset utilization, energy savings, and operator...

— System 800xA ABB’s award winning System 800xA provides you with a better way to achieve measurable productivity and profitability improvements. System 800xA extends the scope of traditional DCS systems to include all automation functions in a single operations and engineering environment; enabling your plants to perform smarter and better at substantial cost savings. Embracing the principles of open, real-time networking, System 800xA provides a scalable solution that spans and integrates loop, unit, area, plant, and inter plant controls. From providing a secure foundation with robust,...

SYSTEM 80 0XA 6.1 PRODUCT CATALOG System 800xA from ABB is a control system that enables plant wide collaboration between people, systems and equipment. System 800xA utilizes a system architecture built for collaboration in a fully redundant, reliable environment. Removing the barriers in traditional distributed control systems, System 800xA provides a collaboration environment that is required to increase productivity while reducing risk and total cost of ownership.

PRODUCT CATALOG SYSTEM 800XA 6.1

— System 800xA Software The system installation is supported by the Automated Installation program. The Automated Installation program is a shell framework to ease the installation and configuration of your 800xA System. Installation is never prevented due to lack of licensing, but licenses are required to unlock features for operating or ngineering the system. e Updates and security related software from nonABB companies must be downloaded and installed separately, as guided from the Automated Installation program. The Automated Installation program is supplied on the 800xA media box. The...

PRODUCT CATALOG SYSTEM 800XA 6.1 Automation Sentinel Program Automation Sentinel is the control system lifecycle support program and is aimed at providing services for the maintenance, continuous enhancement and evolution of the ABB installed base of control systems. Each and every control system under Automation Sentinel can make use, depending on the active subscription mode, of the following main program deliverables listed below: Software Updates and upgrades Automation Sentinel users have the exclusive right to receive control system software updates and upgrades: • Automation Sentinel...

— System 800xA 6.1 System Identifier — Control System Lifecycle Management Program Control System Lifecycle Management Program Software License Certificate License ID: Part of Automation Sentinel Subscription: Automation Sentinel Subscription Status: End User System Name: Control System System Name: ABB AB Business Center N/A 721 59 Vasteras Sweden Global Customer AB Tvaerleden 23 Attn.: Phone: Mobile: Attn.: Phone: Mobile: Buyers Order Reference: ABB Order No.: Project ID: The software described below is licensed to End User based on the terms and conditions of the software. Software under...

— System 800xA 6.1 — Remark Remark When System Software Expansion licenses are ordered, the Serial Number of the ABB Software License Cerificate for the previously ordered System Software licenses must be stated on the order to the ABB Supplier. — Automation Sentinel Upgrade Orders Automation Sentinel Upgrade Article no. Automation Sentinel Upgrade Part of Automation Sentinel Subscription: Automation Sentinel Subscription Status: End User System Name: Control System System Name: ABB AB Business Center N/A 721 59 Vasteras Sweden Global Customer AB Tvaerleden 23 Attn.: Phone: Mobile: Read...

Redundant Tags Article no. All process objects with an operator faceplate counts as a tag. (Total max 120,000. Can not be mixed with non-redundant tags) Enables tag access through redundant Connectivity Servers. 100 tags, redundant 6.1 3BSE088745R1 One process object with faceplate for operator interactions count as a tag.

Subscriber System Tags Tags in the subscriber system in a Multisystem Integration configuration. These tags are Object with a faceplate that collects data from a provider system. Subscriber tags are only required in the subscriber system. Subscriber tag is required for every provider tag that needs to accessed from graphics, alarms, trends etc, in a subscriber system. Note that non-redundant Multisystem Subscriber Tags can not be mixed with Multisystem Subscriber Redundant Tags. Note that Multisystem Subscriber Tags can not be mixed with Multisystem Read Only Subscriber Tags. Tags in the...

Base System System 800xA Applications Multisystem Read Only Subscriber Tags Base System Connectivity Connectivity Article no. Note that there may be 800xA price list options that are not supported with a particular OCS controller. Please refer to the table “Available functions per Controller Connectivity” in the System Guide “Technical Data and Configuration Information”. To check what connectivity combinations that are valid, use the Project Wizard or refer to the System 800xA System Guide for information. PLC Connect 6.1 Faceplates, graphical elements and means to communicate with...