DATA SHEET 1 Ordering Data Part no. For planning and commissioning of new installations use modules in Active status only.

Technical Data The dimensions are in mm and in brackets in inch. 3 Technical Data The System Data of AC500-eCo apply $ Chapter 4 “System Data AC500-eCo" on page 4 Only additional details are therefore documented below.

Technical Data of the Analog Inputs Technical Data of the Analog Inputs NOTICE! Attention: All I/O channels (digital and analog) are protected against reverse polarity, reverse supply, short circuit and continuous overvoltage up to 30 VDC. 3.1 Technical Data of the Analog Inputs

System Data AC500-eCo Environmental Conditions * NOTICE! Exceeding the maximum power supply voltage (> 30 VDC) for process or supply vol-• tages could lead to unrecoverable damage of the system. The system could be destroyed.

Insulation Test Voltages, Routine Test

Electromagnetic Compatibility

4.7 Approvals and certifications Information on approvals and certificates can be found in the corresponding chapter of the Main catalog, PLC Automation.

— ABB Automation Products GmbH Eppelheimer Str. 82 69123 Heidelberg, Germany Telephone: +49 (0)6221 701 1444 Fax: +49 (0)6221 701 1382 E-mail: [email protected] abb.com/plc — © Copyright 2017-2018 ABB. We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.