Pole Mounted Capacitor System Q pole
8Pages

Q pole Pole Mounted Capacitor System 'ower and productivity for a better worldTI

Introduction The ABB 'Qpole' pole mount capacitor system is an economical solution for shunt reactive compensation on overhead distribution networks. The Qpole is suitable for use in networks up to 36 kV. The Qpole capacitor system offers customers several benefits including: - Power factor correction close to customer loads - Voltage stability - Increased network capacity - Cost savings through lower losses The Qpole is available as a fixed or switched system depending on the network profile. Fixed systems are preferred in networks with constant loading, whilst switched systems are more...

Key Components ABB Capacitors The ABB capacitor unit is designed for heavy-duty opration in outdoor, enclosed and pole mounted capacitor banks in all climatic conditions. The capacitors are impregnated with a biodegradable, non-PCB fluid with high insulation strength to ensure excellent electrical performance. The edges of the foil electrodes are folded enabling the unit to withstand high transient currents and minimising partial discharge. This ABB process is superior to all other methods employed. ABB capacitors have an extremely low failure rate and high reliability. The ABB capacitor...

Key Components continue! ABB CQ900 Smart Controller ABB's CQ900, the next gn驩ration in smart controllers, is designed specifically for capacitor applications. They feature an extensive range of control modes including remote, automatic and manual control. The automatic mode includes VAR, time, temperature, power factor, current and/or voltage control, as well as combinations of these. In addition to this, the CQ900 includes measurement and monitoring capabilities and useful features such as a 10,000 event data log for easy analysis and trouble shooting. The CQ900 is now equipped to...

Technical data General Power 150 ... 3600 kvar Voltage Up to 36 kV Insulation level Up to 50/125 kV BIL Frequency 50 or 60 Hz Arrangement Grounded Y, Ungrounded Y or Delta Number of capacitors 3, 6 or 9 units Control voltage 120 or 240 Vac Temperature range -50 to +55 °C for fixed banks* Frame Galvanized steel or aluminium Features Pole bracket, lifting eyes, bird guards Control options Fixed or switched Standards IEC, ANSI, IEEE & CSA Mounting hardware Included Capacitor ABB model Single or three phase Discharge Resistors Built-in Losses < 0.15 W/kvar including resistors Dielectric...

Dimensions (mm) STANDARD 3-UNIT QPOLE e s 457 (17.99") 022 (0.87") 570 (22.44") - 836 - (32.91") - 1029 - (51.78") (40.51") Switch Type on Qpole PS15 815 32.09" 932 36.69" PS25 895 35.24" 1072 42.20" Please contact ABB for dimensional details of other Qpole configurations. 06 Qpole | ABB Pole Mounted Capacitor System

Contact us Please contact your local sales reprsentative for further information ©Copyright 2010 ABB. All rights reserved. ABB is working continuously to improve our products. We therefore reserve the right to change designs, dimensions and data without prior notice. www.abb.com/powercapacitors www.abbaustralia.com .au Power and productivity for a better world1