Mipeg X Mipeg X is a modular, end user configurable system. The main, standard building blocks are listed below with the key technical specification. The system is tested to comply with the EN 61000-6-3 (2007) + A1 (2011) EMC Emission standard and EN 61000-6-2 (2005) EMC Immunity standard to verify compliance. Key features • Flexible • Expandable • User Configurable • Compatible with existing load sensors • Color graphical touch screen monitor Operator’s Display: Physical size: 415x290x110mm (16.3x11.4x4.3”), weight approx. 8 kg (17.5 lbs) Mounting bracket: VESA 200x200, allowing best possible flexibility, pan and tilt adjustment Display size and specification: 15”, portrait format using color TFT-LCD backlight technology, 1280x800 pixels, 16.7 million colors. Active area of display, 207x331 mm (8.1x13”), WxH Extreme brightness:1000 cd/m2, reducing glare and reflection Touch screen : Analog resistive, touch screen (can use gloves) and > 5 million finger touch operations Data transfer: 1xUSB for data transfer (down loading of records) Operating temperature: -20 to +50°C (-4 to +122°F) Shock & Vibration: 40G, half sine Certification, 3rd party: Ingress protection IP66 Atex and IECEx zone 2 certified, II 3G Ex nA nC IIC T4 Gc Computer Cabinet: Physical size: 380x380x150mm, (15x15x6”) WxHxD, weight approx. 12 kg (26.5 lbs) Standard model, sheet metal, epoxy coated - stainless steel optional Mounting bracket: External wall mounting bracket included Operating temperature: -20 to +50°C (-4 to +122°F) Certification, 3rd party: Power Supply: Ingress protection IP66 (NEMA 4), Atex and IECEx zone 2 certified, II 3G Ex nA nC IIC T4 Gc Nominal 24 Vdc power (18-36 Vdc), 2.1 A Solar Panel/Battery operation, 12 Vdc and 110-230 Vac, 50-60 Hz available Crane/Application Interface: Switch inputs: 16 limit switches/change-over digital switches, ie Hoist limits, Rigging switches, Personnel/Man Riding selection switches Analog inputs, 8 channels: Load sensor input: 4 frequenzy bases CANbus: For 4 absolute encoders Range: 0-10 Vdc signals, programmable to project specific requirements 4-20 mA (0-20 mA) signals, programmable to project specific requirements Outputs: 16 programmable outputs to control solenoids, alarms and other 3rd party equipment and logic such as PLCs Analog outputs, 6 channels: Range: 0-10 Vdc signals, programmable to project specific requirements 4-20 mA (0-20 mA) signals, programmable to project specific requirements Communication: RS485 Modbus to main display 2x RS232 for test equipment and communication to PLC l

Data transfer: Certification, 3rd party: 1xUSB for software uograde (up/down loading of configuration) Ingress protection IP66 Safe area or zone 2, Atex and IECEx certified , II 3G Ex nA IIC T4 Radius/Boom Angle Sensor: Physical size: 133x133x120mm (5.2x5.2x4.7”), weight approx. 8 kg (17.5 lbs) Mounting bracket: Vertically mounted on the side of the boom using two bolts Operating temperature: Accuracy and repeatability: Measuring range: Certification, 3rd party: Crane Slew & Hook Position and direction sensor: Physical size: Ø78 (3.07”)x95mm (3.7”), weight approx. 3 kg (6.6 lbs) – stainless steel...