Conductivity Sensor 5819 is a compact fully integrated sensor for measuring the electrical conductivity of seawater. Designed to be used with SeaGuard or SmartGuard data logger using AiCaP CANbus or as stand-alone sensor using RS-232/RS-422 Advantages: • Smart Sensor for easy integration with SeaGuard and SmartGuard Easy integration with most loggers or systems Direct readout of engineering data Rugged and robust with low maintenance needs Output format AiCaP CANbus, RS-232/RS-422 3 depth ranges available: 300, 3000 and 6000 meters Measuring conductivity together with temperature and depth information, gives a good estimate of the salinity. Salinity is defined as the concentration of dissolved salts, mainly sodium and chloride ions. Other important properties of seawater are again dependent on the salinity. Among these are the density and the speed of sound. The Conductivity Sensors uses an inductive principle and is the fourth generation from Aanderaa. It offers top accuracy and s

CONDUCTIVITY SENSOR Silicone Nitride Tube Primary Core Secondary Core ±0.0004 S/m (±0.004 mS/cm) ±0.0018 S/m (±0.018 mS/cm) ±0.005 S/m ( ±0.05 mS/cm) <3 sec 2) <0.0001 S/m per month (0.001 mS/cm per month) O-ring 13,1x1,6 Ø16 Sensor Foot M16x1 Interface Board Temperature: Range: Resolution: Accuracy: Response Time (63%): Output Parameters: 0.16 + 48 mA/S where S is sampling interval in seconds 100 mA 0.16 mA Operating depth: Shallow Water (SW): Intermediate Water (IW): Deep Water (DW): Current drain: Average: Maximum: Quiescent: Supply voltage: Conductivity, Temperature, Salinity, Density and...