Turbidity Sensor 4296 is a compact fully integrated sensor for measuring optical backscatter in water. It is designed to be used with SeaGuard or SmartGuard data logger using AiCaP CANbus or as stand-alone sensor using RS-232 Advantages: • • • • • • • Smart Sensor for easy integration with SeaGuard and SmartGuard Direct read out of engineering data, multipoint factory calibrated Enter site specific reference data to receive absolute values in mg/l Low power consumption Rugged and robust with low maintenance needs Output format AiCaP CANbus, RS-232 3 depth ranges available, 300, 3000 and 6000 meters Turbidity is the optical property of the water that causes light to be scattered by suspended particles. High particle concentration causes high turbidity. By establishing the relationship between turbidity and the local suspended matter this measurement can be used for assessing the concentration of suspended matter. The Turbidity Sensor 4296 measures the backscatter of infrared light. A high efficiency light emitting diode is used to transmit modulated light into the water. The backscattered light is picked up by a sensitive photodiode and this signal is then conditioned, linearized and converted to data in engineering unit (FTU). In addition to turbidity, the sensor also measures water t

Range: Technical 4296,4296R 4296A,4296RA Turbidity: 4296B,4296RB Range: 4296C,4296RC Scattering angle: Resolution: Aperture: Temperature: Wavelength: Range: Scattering angle: Resolution: Aperture: Accuracy: 0.1% of reading or 0.025 FTU ±3% of range. Multipoint calibrated for each range 880 nm Output Parameters: Turbidity, Temperature, Sampling interval: Output format: Raw data 4296, 4296A, 4296B, 4296C AiCaP CANbus and RS-232 Output Parameters: Supply voltage: Current drain: interval: Sampling Average: Supply voltage: Current Maximum: drain: Quiescent: Average: Maximum: Operating depth: Quiescent:...