Catalogs >
Aanderaa Data Instruments AS >
Temperature Sensors 4050

Temperature Sensors 4050
2Pages

Catalog excerpts

Temperature Sensor 4050 Temperature Sensor 4050 is a compact fully integrated sensor for measuring the water temperature. The sensor is designed to be mounted on AADI RCM 9, RCM 11.The sensor can also be used as stand alone, and is easily integrated in other measurement systems with third party dataloggers. Temperature Sensor 4050 advantages: • Smart Sensor technology • Configurable range for improved accuracy when used with Aanderaa current meters • Depth rating of 6000 meters • Short response time, less than 2 seconds • Rugged and Robust with minimal and simple maintenance needs • Resolution: 0.001ºC • Accuracy: ±0.03ºC • Output format: Aanderaa SR10, RS232 The Temperature Sensor 4050 is an intelligent sensor designed to be used on Aanderaa Dataloggers as well as in other measurement systems. The sensor is based on a thermistor-bridge. A Digital Signal Processor controls the sampling of the bridge and calculates the calibrated temperature in engineering units. The sensor is housed in a rugged titanium cylinder. The processed data is available as either RS232 or Aanderaa SR10 output. The user may configure the measurement range on the SR10 output; best accuracy is achieved with a short measurement range. Aanderaa RCM 9 or RCM 11 and connected to the Main Control Board (Electronic Board) with a short cable, Sensor Cable 3854. The sensor can also be connected to the top end plate via a cable/ string for temperature measurements in a different site than the instrument. The 10-pin receptacle in the sensor foot mates with Aanderaa CSP (Cylindrical Sealing Plug) giving access to RS-232 output. For connection to a Personal computer (PC) Sensor Cable 4865 can be used. It is furnished with a watertight 10-pin plug at the sensor end. An additional USB plug is used for providing power to the sensor. The sensor can be mounted directly on the top end plate of the

Open the catalog to page 1

Fenwall Thermistor Crimp Tube — Titanium Housing Sensor Board Interface Board Sensor foot Output format: Sampling Interval: Supply voltage: Operating temp.: Electrical connection: S is sampling interval in seconds recording interval in minutes (Cylindrical Sealing Plug) Titanium and Epoxy coating Real-time license and Collector 4715 Receptacle, exterior view; tushir^ Ordering information: Remember to select Operating Depth (SW, IW or DW) when ordering Temperature Sensor 4050. (1) Extended range available on request. The range on the SR10 (3) 9600 baud, 8 data bits, 1 stop bit, No parity,...

Open the catalog to page 2

Temperature Sensors 4050 2Pages

Catalog excerpts

All Aanderaa Data Instruments AS catalogs and technical brochures

Temperature Sensors 4050
2Pages