Catalogs >
Aanderaa Data Instruments AS >
Pressure sensor 4017

Pressure sensor 4017
2Pages

Catalog excerpts

Pressure Sensor 4017 is a compact fully integrated sensor for measuring the pressure level and the water temperature. The sensor is designed to be mounted directly on the top-end plate of RCM 9/11,RDCP or via cable to AADI Data logger using SR10. The sensor can also be used as stand alone sensor using RS-232. The sensor is easily integrated in other measurement systems with third party data loggers. Features Pressure Sensor 4017 : • Smart sensor technology - plug and play • Calibration coefficients are stored in the sensor • Low maintenance needs • Low current drain • Depth rating of 6000 meters • Direct readout of engineering data • Output parameters: Pressure, Temperature • Selectable interval from 1 second to 255 minutes • Rugged and robust with low maintenance needs • Output formats: SR10, RS-232 • Up to 60MPa range • Configured using Pressure setup program 4047 (or via Hyper Terminal In most measuring system used in the sea, pressure is a vital parameter. For moored instruments the pressure can be used for determining the actual depth of the instrument. For instrumentation on the seabed the pressure can be used for deriving water level. The pressure is also vital when deriving other parameters as density and speed of sound. The Pressure Sensor 4017 is a compact yet intelligent sensor designed to be used on our RCM 9, RCM 11, RDCP or AADI Data loggers as well as in other measuring systems. The sensor is based on a silicon piezoresistive bridge sampled and temperature compensated by an advanced Digital Signal Processor. The sensor is housed in a rugged titanium cylinder. Since all calibration and temperature compensation data are stored inside, the pressure can be presented directly in engineering units without any external calculation. Two SR10 channels are available; one for Pressure and one for Temperature. The user may configure the range on both outputs; best accuracy is achieved with a short measurement range. The sensor can be mounted directly to the top end plate of Aanderaa Acoustic Current Meters and Profilers and connected to the Main Control Board (Electronic Board) with a short cable, Sensor Cable 3854. The 10-pin receptacle in the sensor foot mates with Aanderaa CSP (Cylindrical Sealing Plug), giving access to RS-232 output. For connection to a PC the 1 meter Sensor Cable 4865L can be used. It is furnished with a watertight 10-pin CSP plug at the sensor end. An additional USB plug is used for providing power to the sensor. The 4865 is also available in other cable lenght up to 20 meter.

Open the catalog to page 1

Cover Fenwall Thermistor O-ring 12.1x1.6 Transducer Board Sensor Foot DSP Board Tri Sorb tablet Interface Board Insert housing O-ring 12.1x1.6 O-ring 13.1x1.6 Lemo Insert D357 - December 2009 Pressure: 4017A Range: 0 – 1000kPa (0 – 145 psia)(1),(4),(5) 4017B Range: 0 – 4000kPa (0 – 580 psia)(1),(5) 4017C Range: 0 – 10000kPa (0 – 1450 psia)(1),(4),(5) 4017D Range: 0 – 20000kPa (0 – 2900 psia)(1),(5) 4017E Range: 0 – 40000kPa (0 – 5800 psia)(1),(4),(5) 4017F Range: 0 – 60000kPa (0 –8700 psia)(1),(5) Resolution: ±0.0001% FSO(2) Accuracy: ±0.04% FSO Temperature: Range: 0 – 36°C (32 – 96.8˚F)(1)...

Open the catalog to page 2

Pressure sensor 4017 2Pages

Catalog excerpts

All Aanderaa Data Instruments AS catalogs and technical brochures

Pressure sensor 4017
2Pages