SINGLE TUBE FLOW METERS INTERCHANGEABLE Designed for low flow rates, the Model P flow meter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical rotameter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow and level indicating,etc. 150 mm Meter with CVTM Valve Shipped completely assembled, flow meters include standard mounting fittings in a choice of materials, side plates, thick protective magnifying front shield and back plate, optional built-in control valve, and flow tubes selected from the Flow Capacities tables. Panel mounting style is convertible to bench mounting through the use of the optional acrylic tripod. The tripod has a built-in spirit leveler and leveling screws. For multiple tube meters see pages 17 and 18. design features ✓ Rib-guided or fluted metering tubes facilitate stable, accurate readings. ✓ Magnifier lens in front shield to enhance reading resolution. ✓ Interchangeability of flow tubes and floats. ✓ Ease of installation and exchange of flow tubes. ✓ “Non-rotating” adapter feature - glass flow tubes are prevented from turning during the tightening phase of the assembly procedure. ✓ OPTIGRADTM scales minimize parallax and eye fatigue. ✓ Simple means of panel mounting. 17 65 mm Meter with MFVTM Valve WWW.AALBORG.COM - E-MAIL ౧ : [email protected] - PHONE ( 845.770.3000 - TOLL FREE IN U.S.A. AND CANADA 1.800.866.3837 - ORANGEBURG N.Y. U.S.A.

SINGLE TUBE FLOW METERS BUILT-IN VALVES Select flow tube consistent with requirements from flow capacity tables 6 to 22 (page 55 to 61). Meters are available with built-in needle valves (CVTM), high precision metering valves (MFVTM) with “non-rising stems”, or with no valves. The higher cost of MFVTM valves is justified whenever high sensitivity control and resolution are desirable particularly in conjunction with metering tubes of very low flow rates. Generally, for gas metering it is recommended that valves are positioned at inlets (bottom) for liquids valves may be positioned either at inlets...

MULTIPLE TUBE FLOW METERS The Model Px multiple tube flow meter line offers, the convenience and simplicity of 2, 3, 4, 5 and 6 tube meters, retaining most of the unique design features associated with single tube units. Multiple tube meters are available with 65mm or 150mm flow tubes same as used in single unit flow meters. Px meters are convenient for applications where several streams of gases or liquids are to be metered in individual channels, or manifolded. Shipped completely assembled, flow meters include standard mounting fittings in a choice of materials, side plates, thick protective...

BUILT-IN VALVES MOUNTING DIMENSIONS Meters may be supplied with built-in needle valves (CV™), high precision metering valves (MFV™) with "non-rising stems", or with no valves. recommended that valves are positioned at inlets (bottom) for liquids valves may be posi- tioned either at outlets (top) or inlets. For vacuum service, valves must be mounted at time of ordering, meters will be shipped with valves mounted NOTE;: NUMBERS IN BRACKETS STANDARD ACCURACY ±2% FS mm scales except 042 and 032 flow tubes. ±5% FS direct reading scales 042 and 032 flow. Specification 2-S-10. Manifolded models excepted....

DERING INFORMATION MODEL P METERS PSTYLE METERS VALVE POSITION MFV (HIGH PRECISION) INLET CV (STANDARD CARTRIDGE) INLET MFV (HIGH PRECISION) OUTLET CV (STANDARD CARTRIDGE) OUTLET VITON® STANDARD ON STAINLESS METERS BUNA® STANDARD ON BRASS AND ALUMINUM PTFE /KALREZ® HOSE NIPPLE HOSE NIPPLE NONE (STANDARD FOR SINGLE CHANNEL) Optional Accessories Select tube from the following tables: TP1-Tripod for single channel meter. Tables 6 to 22. Pages 58 to 64. TP2-Tripod for 2, 4 and 6 isolated channels or manifolding at top. TP3-Tripod for 3 and 5 isolated channels or manifolding at bottom. TP5-Tripod...