Visit our web site at: www.aalborg.com Worldwide Distribution Copyright © 2013 by Aalborg®. All rights reserved. Printed in the United States of America.

Founded in 1972, AALBORG® is well-known throughout the world as a primary manufacturer of precision instrumentation for flow measurement and control. We operate two divisions: The Electronics Division produces a line of Peristaltic Pumps, Thermal Mass Flow Controllers, Vortex Shedding Flow Meters, Proportionating Solenoid and Motor driven control valves. The Variable Area Division manufactures a complete line of glass tube rotameters. These flow meters are available with aluminum, brass, stainless steel or PTFE wetted components. AALBORG® also manufactures a unique line of PFA tube meters for...

Table of Contents GENERAL DESCRIPTION / PRINCIPLES OF OPERATION TPUFX MODEL TPUAD MODEL TPUDP MODEL TPURP MODEL TPVAD MODELS TPVDP MODELS TPVRP MODELS FLEXIBLE TUBING

GENERAL DESCRIPTION / PRINCIPLES OF OPERATION Four Roller TPT Pump Three Roller TPV Pump General Description Aalborg’s TPT, TPU and TPV model peristaltic pumps are designed for safety and long tubing life. They are economical, easy to load, sturdy, and compact with small footprints. Designed for use with liquids of widely diverse viscosities, they are suitable for laboratory, processing, and OEM applications, including fuel with the appropriate tubing. Power supplies for all pumps (except TPUFX) need to be ordered separately. For power supply part numbers please consult the Accessories tables...

Please Note: Power Supply needs to be ordered separately TPT Mini Peristaltic Pumps Economical Model TPT Mini Peristaltic Pumps are designed for liquids. Simple to load and operate, two plastic thumbscrews allow easy Occlusion Wall adjustments, provide longer tubing life, and secure the safety shield. Two plastic slide on/off tube holders assure quick tubing loop replacements. User-selectable flow rates from 1.90 mL/min. to 25 mL/min. are dependent on the tubing material and ID; 1/32" wall tubing is required. Power supplies for all TPV pumps need to be ordered separately. For power supply part...

For dependable and safe pumping of liquids at very low flow rates. Design Features ᭜ ᭜ ᭜ ᭜ ᭜ ᭜ ᭜ ᭜ ᭜ 4 roller aluminum pump head. Cast bronze self-lubricating rollers.. Continuous duty 24 VDC brush style gear motor with internal permanent magnet. CW-OFF-CCW switch. Safety shield to prevent finger contact with moving parts. Lightweight 3.5 lb. Compact 5" x 4" footprint. Tubing Loops of different materials and sizes including fittings are available. Manual or pre-set Counter feature indicates the number of revolutions. (not included). ACCESSORIES Power Supply 24 VDC, 1.08 Amp, and 2.1 mm center-...

Four Roller TPU Pump Please Note: Power Supply needs to be ordered separately General Description Aalborg’s TPU four and ten roller model peristaltic pumps are designed for safety and long tubing life. They are economical, easy to load, sturdy, and compact for a small footprint. Designed for use with liquids of widely diverse viscosities, they are suitable for laboratory, processing, and OEM applications, including fuel with the appropriate tubing. A Remote Start option is available on Dispenser Pumps using the 9-pin female D-connector located on the rear panel. Power supplies for all TPU pumps...

PUMPING SPEEDS Speeds depend on the motor you add to the pump head. Motor (including mounting kit) available for separate purchase; factory mounting optional. POWER SUPPLY* Optional desktop power supply and cord. See ordering on page 15 (needs to be ordered separately). ELECTRICAL REQUIREMENT 6.50 in. (165 mm) WIDE x 6.57 in. (167 mm) DEEP x 4.12 in. (105 mm) HIGH excluding handle. MAXIMUM LIFT, PUMP HEAD MAXIMUM SUCTION, HEAD RECOMMENDED TUBING MATERIALS 1/16 IN. WALL Tygon® E-3603, peroxide-treated silicone, platinum-treated silicone, PharMed® Versilic® silicone, Tygon® Sanitary silicone, Norprene®...

Flow Rate Graphs To select the pump that best corresponds to your needs using the Flow Rate graphs: 1. Locate the desired flow rate where it intersects with the tubing diameter plot lines. 2. Project the intersections to the RPM axis at the bottom of the graph. 3. If your chosen flow rate falls between the fixed RPM choices (the blue boxes labeled FA, FB, etc.), pick the next larger speed or order an adjustable RPM pump, represented by the purple AD (adjustable speed models) box. Armed with this information, consult the features sections that follow, then use the tables on page 15 to identify...

TPU2 Ten Roller Pumps: Note that 5/16-inch I.D. tubing is not recommended for use with the 10-roller pumps. Flow graphs represent typical flow rates based on tubing material and fluid pumped. www.aalborg.com - e-mail ౧ [email protected] - (845.770.3000 - fax 845.770.3010 - Toll Free in U.S.A. and Canada 1.800.866.3837

TPUFX MODEL FX Model Fixed RPM Tubing Pumps Design Features Economical & compact. Adjustable Occlusion Wall. Ideal for laboratory, processing and Stainless Steel Rollers and Shafts. OEM applications. Compact design for small foot print. Can Be Mounted In Any Direction. Long Tubing Life. 4 Rollers, 10 optional to minimize pulsing. Adjustable handle to carry, stand or hang. Wide choice of preset speeds. Peristaltic Pumps designed for liquids of low to high viscosity: www.aalborg.com - e-mail ౧ [email protected] - (845.770.3000 - fax 845.770.3010 - Toll Free in U.S.A. and Canada 1.800.866.3837

TPUAD MODEL AD Model Adjustable RPM Tubing Pumps with Prime Please Note: Power Supply needs to be ordered separately Design Features Ideal for laboratory, processing and OEM applications. Economical & compact. Adjustable Occlusion Wall. Stainless Steel Rollers & Shafts Controls for Prime, Brake, RPM, Reverse flow direction, Power LED. Maintence-free 24 VDC brushless motor. Safety cover. Can be mounted in any direction. Long tubing life. 4 Rollers, 10 optional to minimize pulsing. Adjustable handle to carry, hang or stand. Speed adjustable from 0 to 60 RPM. www.aalborg.com - e-mail ౧ [email protected]...