OPTICAL SENSOR SWITCH O
6Pages

{{requestButtons}}

Catalog excerpts

OPTICAL SENSOR SWITCH O - 1

OPTICAL SENSOR SWITCH P Style Meter with Optical Sensor Switch GENERAL DESCRIPTION The Optical Sensor Switch is a non-invasive means for detection of a HI or LOW flow. This sensor is ideal for signaling an alarm, cutoff valve, or other device when the float passes the detector (alarm, valve, etc. are not included). The Optical Sensor Switch helps protect processes and equipment from damage caused by extreme flow rates. PICTURE SHOWING OPTICAL SENSOR SWITCHES INSTALLED ON A TYPICAL ROTAMETER Used in conjunction with P, S and T Style Flow Meters. Its compact design and ease of operation make it a non-obtrusive, simple to use addition to your flow meter. Perfect for OEM applications, use whenever maximum or minimum flow levels need to be monitored automatically. It also can be used in conjunction with a control relay to power alternate equipment or monitoring devices. PRINCIPLE OF OPERATION A self-contained miniature photoelectric sensor (Thrubeam type) consisting of a transmitter and receiver are mounted at opposite sides of the flow tube on a solid carrier. The float inside the flow tube is detected as it passes across the beam of light. The sensor can be used to detect the float passage beyond the setpoint of the sensor and can also be set to monitor the float position at a specific level, signaling when the float is outside of the range of the sensor light beam. TO ORDER A FLOW METER WITH OPTICAL SENSOR SWITCHES To order a flow meter with a single Optical Sensor Switch add “O1-” to P S, , or T Model Numbers. Example: O1-P11A4-BA0-032-41-ST-VN. WWW.AALBORG.COM - E-MAIL ౧ : INFO@AALBORG.COM - PHONE  845.770.3000 - TOLL FREE IN U.S.A. AND CANADA 1.800.866.38

Open the catalog to page 1
OPTICAL SENSOR SWITCH O - 2

OPTICAL SENSOR SWITCH 31 WWW.AALBORG.COM - E-MAIL M : INFO@AALBORG.COM - PHONE S 845.770.3000 - TOLL FREE IN U.S.A. AND CANADA 1.800.866.3837 - ORANGEBURG N.Y. U.S.A.

Open the catalog to page 2
OPTICAL SENSOR SWITCH O - 3

OPTICAL SENSOR SWITCH PR-F Output indicator (orange) Stable operation indicator (green) Power supply indicator (green) ø3.2 mm Output Wiring Diagram Main circuit WWW.AALBORG.COM - E-MAIL ౧ : INFO@AALBORG.COM - PHONE  845.770.3000 - TOLL FREE IN U.S.A. AND CANADA 1.800.866.3837 - ORANGEBURG N.Y. U.S.A.

Open the catalog to page 3
OPTICAL SENSOR SWITCH O - 4

OPTICAL SENSOR SWITCH P Style Meter with Optical Sensor Switches GENERAL DESCRIPTION The Optical Sensor Switch Hi-Lo is a non-invasive means for detection of a HI or LOW flow. This set of sensors is ideal for signaling an alarm, cutoff valve, or other device when the float passes the detector (alarm, valve, etc. are not included). The Optical Sensor Switch helps protect processes and equipment from damage caused by extreme flow rates. Its compact design and ease of operation make it a non-obtrusive, simple to use addition to your flow meter. Perfect for OEM applications, use whenever maximum or...

Open the catalog to page 4
OPTICAL SENSOR SWITCH O - 5

WWW.AALBORG.COM - E-MAIL M : INFO@AALBORG.COM - PHONE S 845.770.3000 - TOLL FREE IN U.S.A. AND CANADA 1.800.866.3837 - ORANGEBURG N.Y. U.S.A. 34

Open the catalog to page 5
OPTICAL SENSOR SWITCH O - 6

OPTICAL SENSOR SWITCH MOMENTARY OR LATCH OPERATION PR-M Stable operation Output indicator (green) indicator Power (orange) ø3.2 mm supply indicator (green) Optionally the, Hi-Lo Optical Sensor Switch could be supplied with OSSM Module, allowing each sensor to be separately set for momentary or latch operation of buzzer, LED and relay. The OSSM module is equipped with the 8 position DIP switch and requires a +12 VDC power supply with a minimum current rating of 250 mA. Output Wiring Diagram Over current protection circuit Main circuit WWW.AALBORG.COM - E-MAIL ౧ : INFO@AALBORG.COM - PHONE ...

Open the catalog to page 6

All Aalborg Instruments catalogs and technical brochures

  1. Valve catalog

    16 Pages

  2. DPC

    6 Pages

  3. CALIBRATIONS

    13 Pages

  4. S meter

    3 Pages

  5. T / Tx meter

    5 Pages

  6. P / Px meter

    5 Pages

  7. Kits

    1 Pages

  8. SDPROC

    4 Pages

  9. PSV-PSVD

    5 Pages

  10. DFM

    6 Pages

  11. DFC

    8 Pages

  12. XFM

    6 Pages

  13. GFM

    5 Pages

  14. VX

    21 Pages