1. Catalogs
  2. Aalborg Instruments
  3. Gas proportioners back pressure compensated
video corpo

Gas proportioners back pressure compensated

Gas proportioners back pressure compensated

Gas proportioners back pressure compensated

Product catalog summary
Design Features
  • The gas proportioner allows for the blending of two or three gases, eliminating the need for ordering fixed gas mixtures and reducing contamination risks from reusable gas cylinders.
  • It features rib-guided or fluted metering tubes for stable and accurate readings, and OPTIGRADTM scales to minimize parallax and eye fatigue.
  • Flow tubes and floats are interchangeable, and the device offers simple panel mounting.
Back Pressure Compensation
  • The Model G gas proportioner provides homogeneous, infinitely variable gas concentrations directly at the end-use point, offering convenience and cost-effectiveness.
  • It allows for flexibility in using component gas cylinders and piped-in supply lines, and enables reproducibility in laboratory experiments by adjusting concentrations as needed.
  • Flow rates remain unaffected by downstream pressure variations unless back pressures approach or exceed input pressure, with a maximum input pressure of 200 psig (13.8 bars).
Specifications
  • Flow tube accuracy is ±2% FS, with repeatability of ±0.25%.
  • Maximum operating pressure is 200 psig (13.8 bars) and temperature is 250°F (121°C).
  • Materials include heavy-walled borosilicate glass for flow tubes, with options for aluminum or stainless steel fittings.
  • Built-in valves include needle valves (CVTM) and high precision metering valves (MFVTM) for high sensitivity control.
Materials and Construction
  • Flow tubes are made from shock-resistant borosilicate glass, with uniformly tapered bores and internal rib-guides or flutes.
  • Floats are retained by TFE plugs, and the system is self-cleaning with low differential pressures.
Ordering Information
  • Optional accessories include tripod bases for bench mounting, with specific ordering information available on page 32.
See more

Catalog excerpts

Gas proportioners back pressure compensated-1

GAS PROPORTIONERS BACK PRESSURE COMPENSATED To blend two or three gases in homogeneous infinitely variable concentrations, directly at the end use point, this Model G gas proportioner is unsurpassed in convenience and economy. Gas proportioners pay for themselves since they eliminate the need for expensive custom blended gas mixtures. They lend flexibility and economy to the utilization of component gas cylinders and “piped-in” supply lines. Another advantage in laboratory investigations is the freedom to reproducibility increase or decrease concentrations during the course of an experiment. The flow rates are not affected by downstream pressure variations as long as back pressures do not approach or exceed the input pressure. Input pressures of up to 200 psig (13.8 bars) can be used; however, customers’ very often find 50 psig (3.45 bars) a convenient setting to work with. design features ✓ Blending of two or three gases with gas proportioners obviates the need for: ✓ ORDERING FIXED GAS MIXTURES. CONTAMINATION FROM REUSABLE GAS CYLINDERS. POTENTIALLY INACCURATE MIXTURES BY GAS SUPPLIERS. ✓ Rib-guided or fluted metering tubes facilitate stable, accurate readings. ✓ OPTIGRADTM scales minimize parallax and eye fatigue. ✓ Interchangeability of flow tubes and floats. TM Gas Proportioner with CV valve for blending two gases ✓ Simple means of panel mounting. WWW.AALBORG.COM - E-MAIL ౧ : [email protected] - PHONE ( 845.770.3000 - TOLL FREE IN U.S.A. AND CANADA 1.800.866.3837 - ORANGEBURG N.Y. U.S.A.

 Open the catalog to page 1
Gas proportioners back pressure compensated-2

GAS PROPORTIONERS BACK PRESSURE COMPENSATED BUILT-IN VALVES Meters are available with built-in needle valves (CVTM), high precision metering valves (MFVTM) with “non-rising stems”, or with no valves. The higher cost of MFVTM valves is justified whenever high sensitivity control and resolution are desirable particularly in conjunction with metering tubes of very low flow rates. flow tubes ✓ Precision fabricated from heavy walled, shock resistant borosilicate glass. SPECIFICATIONS STANDARD COMPONENT ✓ Bores are uniformly tapered or formed with internal “rib-guides” or flutes. ✓ Floats are retained...

 Open the catalog to page 2
Gas proportioners back pressure compensated-3

TWO CHANNEL METER (TWO TUBES AND ONE MIXING TUBE) THREE CHANNEL METER (THREE TUBES AND ONE MIXING TUBE) Optional Accessories TPG-Tripod for 2 channel gas proportioner. TPH-Tripod for 3 channel gas proportioner. Select tube from the following table: WWW.AALB0RG.COM - E-MAILS: [email protected] - PHONE 8 845.770.3000 - TOLL FREE IN U.S.A. AND CANADA 1.800.866.3837 - ORANGEBURG N.Y. U.S.A. 32

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.