TM-2, TM-2-CG Ducted, Disposable Ceiling Filter Modules for Cleanroom Applications TM-4, TM-4-CG Ducted, Disposable Ceiling Filter Modules for the Most Stringent Requirements

TM-2, TM-2-CG, and TM-4, TM-4-CG Ducted, Disposable Ceiling Filter Modules Lightweight — easy to install White urethane sealant complies with Underwriters Laboratories, Inc. UL-586 and UL-900 Class 1 One-piece top with integral inlet collar Module assembled without screws or other fasteners — no metal shavings or filings Factory scan tested Suitable for gasketed and gel grid systems The TM-2 and TM-4 ducted modules are lightweight, disposable HEPA filter ceiling modules. Both are designed for optimum filter performance in cleanrooms with individually ducted modules. The TM-2 is a commercial,...

• Low Resistance, High Airflow Low Profile Housing (5" Gasket, 5 3/4" Gel) • Two-inch Filter Pack Depth • Lightweight, Disposable Module Construction Detail • Low Profile Housing (7" Gasket, 7 3/4" Gel) • AstroCel II Mini-pleat Filter Pack • Gasket or Gel Seal Installation Options • Gasket or Gel Seal Installation Options • Contractor Grade Available (TM-2-CG) • Contractor Grade Available (TM-4-CG) The AAF TM-2 series, with its minipleat pack, is a commercial, costefficient performer that delivers peak filtration in unidirectional and nondirectional-flow cleanrooms from Class 100,000 to Class...

The low profile housing and light weight of the TM-2 and TM-4 modules make installing them the easiest of any ceiling modules The modules are typically installed in a 13A" or 2" T-bar ceiling grid or 2" wide gel or gasket seal, heavy duty ceiling grids, suspended from the building structure. Simply set the unit in place in the ceiling grid, then connect and seal the flexible supply air duct to the inlet collar. Dimples on the inlet collar prevent the flex duct from slipping off. No hold-down clamping is necessary between the filter and the ceiling grid. Modules can be accessed from the room side...