FM2-LE Self-Contained Energy Efficient Fan/Filter Modules for Cleanroom Applications The FM2-LE is a self-contained fan/HEPA filter module for cleanroom applications. It can be used to upgrade existing cleanrooms or to convert existing space into a cleanroom without additional ductwork or air handling equipment. The modules can be used in most conventional ceiling grids or may be suspended independently. FM2-LE modules are available in 2' x 2', 2' x 3', and 2' x 4' sizes. Options Energy Efficient FM2-LE modules are energy efficient. Each module utilizes a rugged AC motorized impeller rated at 2.4 amps at start up and approximately 2 amps while in operation. The aluminum backward curved impeller is lightweight and has a long service life. All motors are dynamically balanced and 100% quality inspected. Standard Features • Extruded aluminum filter cell sides • AstroCel ® II HEPA filter, 99.99% efficient on 0.3 micrometer particles, 2"-deep minipleat media pack. HEPA meets UL 586 and UL 900 • Duct connection (10" or 12" diameter) in lieu of prefilter • Power cord • Center divider with test port in filter • ULPA filter, 99.9995% efficient on 0.1 - 0.2 micrometer particles, scanned • 3" or 4" deep HEPA or ULPA filter • Knife-edge filters for gel grid systems • 230-volt, 60-Hz motor • Stainless steel faceguard • White expanded metal faceguard on the downstream side of the filter • 16-gauge mill finish aluminum pressure housing with 4 support points for hanging • 115V, 60Hz, single-phase, energy efficient, backward curved motorized impeller wired junction box • Variable speed control • All electrical components UL Classified • PerfectPleat ® M8 1"-deep prefilter with DuraFlex ® media, MERV 8 Latches seal and hold the AstroCel ® filter securely to the module.

Product Information Dimensions Unit Unit Part (inches) Installed Shipping ® 10300 Ormsby Park Place Suite 600 ENERGY STAR AAF has a policy of continuous product research and improvement and reserves the right to change design and specifications without notice The USGBC Member logo is a trademark owned by the U.S. Green Building Council and is used by permission