Catalogs >
AAF International >
AmAir 300X

AmAir 300X
1 / 2Pages

Catalog excerpts

1″, 2″ and 4″ Extended Surface Pleated Panel Filters • Expanded metal pleat support grid (AmAir ® 300X filter) • High loft media increases dust holding capacity • Excellent primary filter to prevent dust build-up on heating and cooling coils, fans, and ductwork • Excellent prefilter for higher efficiency filters • Directly interchangeable with disposable panel filters, media pads in metal frames, or permanent filters used in built-up filter banks and side access systems. No modifications are necessary to frames or latches. AmAir ® 300X filters meet the performance requirements of the most demanding applications. • 4" filters have pleat stabilizers to ensure uniform spacing and increase rigidity (AmAir ® 300X filter) AmAir ® 300X Filters AmAir 300X filters are constructed with AAF’s totally unitized, double wall, die-cut box, beverage board frame. The media pack is bonded inside the frame at all points of contact. AmAir 300X filters are built rugged for durability and reliability under tough service conditions. The AmAir 300X filter is a MERV 7 in accordance with ASHRAE Standard 52.2. Superior Strength AmAir 300X filters are extremely strong and durable, with all components rigidly bonded into a totally unitized construction. The filters will not rack or deteriorate under normal operating conditions, including high moisture applications. An expanded metal grid laminated to the air leaving side of the media creates more consistent pleat shape and maintains uniform pleat spacing. Expanded metal also increases the stability of the pleat pack, reducing media flutter during operation. The media pack support retainers, which are an integral part of the frame, are bonded to the pleats on both the air entering and the air leaving sides. This increases rigidity and also helps maintain proper spacing between pleats for maximum dust holding capacity while minimizing resistance. AmAir ® HT High Temperature Filters The AmAir HT filter is designed for applications with continuous operating temperatures up to 500˚F (260˚C). The frame is an aluminized steel U-channel, with the media pack bonded to the inside on all four edges. An expanded aluminized steel faceguard is spot welded inside the frame on the air-leaving side to retain the media pack at elevated temperatures. AmAir HT filters are made with micro-glass media, and is a MERV 8 in accordance with ASHRAE Standard 52.2.

Open the catalog to page 1

Product Information — (1)Standard Sizes (2, 3)Nominal (2, 3) Sizes Actual Sizes Rated Airflow Capacity (Inches) (Inches) (SCFM) (W x H x D) (W x H x D) 300 FPM 500 FPM 625 FPM (1) Additional AmAir 300X sizes available: 10x20x1 14x20x1 15x20x1 18x24x1 25x25x1 15x20x2 16x24x2 25x25x2 12x12x1 14x25x1 16x16x1 18x25x1 12x20x2 16x16x2 18x25x2 24x20x4 (2) Other standard size and special size AmAir 300X filters are available in handmade construction assembled from four beverage board strips. The filters are stapled in each corner with the pleated media pack bonded to the inside of the frame....

Open the catalog to page 2