L7Drive
127Pages

L7 Drive Designing your future with LS Mecapion L7 Series. Your reasonable selection for total solution The wide range of LS Mecapion line up will satisfy your requirements for the motion system through optimal application and use of the products. With the excellent functionality, high precision and high-speed control, LS Mecapion AC servo system is customer-friendly and cost-effective.

The Best Automation Brand in Korea The World Class Leader in Automation System LS Mecapion has supplied not only the servo drives and servo motors of high quality and high efficiency but also rotary encoders and actuators for the Korean and Global Industries for the past 20 years. We are making efforts to provide a variety of products to our customers all over the world to satisfy their requirements. We have provided cutting-edge technologies that consider the needs of our customers by adopting the best functionality as well as innovative ideas. We have accumulated a deep and wide range of...

Compared with a representative competitor Ultra-thin 38 mm width (400 W) Its small footprint allows flexible installation, reducing the size of the equipment. ■ Easy to USE • The automatic inertia detection function for easier gain adjustment. • Fast and accurate inertia detection • Off-line tuning • Parameters for inertia detection (speed and distance) provided • Encoder based on two-way high-speed serial communication • Automatic recognition for motors and encoders •BiSS protocol • Wire-saving system (7-line) for encoder, resistant to noise • Support for various motors and encoders [L7NH...

Features of L7 Drive ●Sufficient input/output contacts and various functions • L7S: Digital input contacts: 10, output contacts: 8 / Analog input contacts: 2 and output contacts: 2 • L7N: Digital input contacts: 6, output contacts: 4 / Analog input contacts: 2 and output contacts: 2 • L7NH: Digital input contacts: 8, output contacts: 4 / Analog input contacts: 1 and output contacts: 2 • L7P: Digital input contacts: 16, output contacts: 8 / Analog input contacts: 2 and output contacts: 2 • PEGASUS: Digital input contacts: 4, output contacts: 2 / Analog input contacts: 1 and output contacts:...

Features of L7 Drive ■ Reliability • Main capacitor quality improved •Long-life type capacitor applied (2.5 times improvement) • Convenient DC reactor installable • Power connection to DC-link • Easier wiring and smaller size compared to 3-phase AC reactor • Connection for DC input (PI, N) • Stable turn-off function based on the detection of the control power turn-off • CE certification and RoHS certification •Enhanced protection function •Triple protection function for the protection of power module •Detection of the main power phase loss •Temperature sensor installed in the drive and...

Features of L7 Drive ▒ Intelligent Control ●Notch filter for resonance suppression • 4-step notch filter • 2-step vibration suppression filter at the load position • FFT function for real-time frequency analysis ●Various gain switching modes for improved control performance •P/PI auto-switching function to reduce overshooting during acceleration/deceleration •Various Gain1 ↔ Gain2 switching modes ●Various dynamic brake control modes •Configuring the operation mode at stop and after stop ▒ Network Based – EtherCAT Network Type ●A wide range of products • L7N: EtherCAT communication command...

L7 SERIES SYSTEM Features of L7 Drive ●Various operation modes Emergency Switch • L7N: Using the EtherCAT communication to support Cyclic (P/S/T) and Profile (P/S/T) modes • L7NH and PEGASUS: Using the EtherCAT communication to support Cyclic & Profile (P/S/T) modes, EOE, COE, and FOE ●Safe torque off function • Torque-off forced by hardware signals without involvement Safety Module Safety Light Curtain of the drive CPU and FPGA (ASIC); international standards adopted (IEC61508)) ●Flexible I/O setup • Mapping and level (A/B) setup by parameters ●High-speed position capture •Touch probe...

Servo Setup Software ▒ Live-I.C.E : L7S and L7N Series ●Monitoring function • Monitoring for I/O input contact and I/O output contact • Driving Information monitoring: Monitoring and displaying the parameter values • Communication connection monitoring : Displaying the current communication connection status using animation in real time ●Setup function • Using the PC to read and write parameters • Manual JOG function: Manual jog speed adjustment and forward/reverse test • Automatic gain tuning • Alarm history and alarm reset ●Graph function • Data Trace: Graphic presentation of pre-defined...

L7 SERIES SYSTEM Servo Setup Software ▒ Drive CM : L7NH, L7P and PEGASUS Series ●I/O CONFIGURATION •Setting the output function and its signal level for I/O input contacts and I/O output signal pins •Limiting the analog input torque and using the analogue voltage to override the speed •Analog monitoring output for the gain tuning or internal state variables of the drive ●Monitoring function •Implementation of 4-channel tracer or trigger monitor •Performing various operations, including Manual Jog, Program Jog, PTP Move, etc., and monitoring the operation state • Monitoring Zoom or Pan /...

INDEX Servo Drive L7S Series Servo Motor S Series Options Servo motor cable Servo drive cable _ 111 Other options Integrated Servo System PEGASUS Series _ 115

L7 SERIES SYSTEM Contents ▒ Servo Drive ・Servo Drive Designation General Pulse Type, Analog Command Type ・Product Feature ・Servo Drive Designation EtherCAT Communication Command Type ・Product Feature ・Servo Drive Designation All-in-one EtherCAT Communication Command Type L7P Series Indexer Function Type ・Product Feature ・Servo Drive Designation ・Product Feature

General Pulse Type, Analog Command Type ▒ Servo Drive Designation Model Name Input Power Supply Encoder Type Servo Series A : Quadrature (Pulse Type) Exclusive Option Code B : Serial (Communication Type) PEGASUS Series