*mydirectindustry

CTH1233

Product catalog summary

Overview: The document provides technical specifications for the CTH1233 series of through bore slip rings, which are designed for routing hydraulic or pneumatic lines and feature a compact design with a 12.7mm through-bore and 33mm outside diameter. These slip rings utilize fiber brush contact technology for enhanced performance in challenging applications.

Specifications:

Electrical Data: Rated voltage is 0~240VAC/VDC for both power and signal. Insulation resistance is ≥500MΩ/500VDC. Lead wires are AWG17, AWG22#Teflon, with a standard length of 300mm (adjustable). Insulation strength is 500VAC@50Hz for 60 seconds, and electrical noise is <0.01Ω.
Mechanical Data: Working temperature ranges from -30°C to 80°C, with operating humidity between 0~85% RH. The contact material varies by product quality level, and the housing material is PBT. Torque is 0.1Nm, with an additional 0.03Nm per 6 rings. Protection grade is IP51.

Product Quality Levels: The document outlines different quality levels with corresponding maximum rotating speeds and working life:

Standard (S): 250RPM, 20 million revolutions, precious metal contacts.
Industrial (I): 1000RPM, 60 million revolutions, gold-gold contacts.

Part Number Composition: The part number includes details such as the number of power and signal wires, flange position, rotor and stator cable lengths, and special options like communication protocols (e.g., CanOpen, Ethercat) and protection grades (e.g., IP65, IP68).

Lead Wires Color Code: The document provides a color code for lead wires corresponding to different rings, facilitating simplified electrical connections.

Catalog excerpts

through bore slip rings CTH1233 series provides a 12.7mm through-bore for routing of hydraulic or pneumatic lines or hydraulic or pneumatic rotating shaft installation, and a compact 33mm outside diameter,features long life, fiber brush contact technology for ultimate performance in many-challenging applications. CTH1233 series are standard, off-the-shelf products, Color-coded lead wires are used onboth the stator and rotor for simplified electrical connections.It can transmit signal(2A), 5A current when 360° degree free rotating.

Open the catalog to page 1

PRODUCT QUALITY LEVEL TABLE PART NUMBER COMPOSITION 00000 - xxxxx ~sm 2> Inner Dia g Outer Dia S Quality Level S = Standard I = Industrial H = High level [4 Number of power wires I Number of signal wires [8 Rotor cable length [9 Stator cable length 10' Special Options 01CAN = CanOpen 01ECT= Ethercat 01PRO = Profibus 01ETH = Giga Ethernet IP65 = IP65 IP68 = IP68 In accordance with our policy of continual product improvement, A2V reserves the right to amend the specification of these products without prior notification Parc Bel Air la Foret 6 rue Maryse Bastie 78125 GAZERAN

Open the catalog to page 2

CTH1233

CTH1233

Catalog excerpts

All A2V Mécatronique catalogs and technical brochures

Archived catalogs