Catalog excerpts
Glass Reinforced Polyester Enclosures Glass Reinforced Polyester Enclosures
Open the catalog to page 2Glass Reinforced Polyester Enclosures The BPG range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates, bacteria and enzymes. It is also suitable for LSOH (low smoke zero halogen) applications. Polyester gives excellent mechanical strength and life expectancy. The wall thickness is sufficient to allow tapped entry holes to be machined in the walls of the enclosure and it provides a very good alternative to aluminium or cast iron. Due to the enclosure's...
Open the catalog to page 3Wide Operating Temperature (-60°C to + 130°C) (-76°F to +266°F) Can be drilled and tapped to accommodate most thread forms (NPT for example) UL, CSA, IEC Ex, ATEX, InMetro and TR CU Approvals The BPG and BPGC enclosures are suitable for use in hazardous areas and can be supplied with a number of certificates, specifically ATEX EEx'e' to BS EN 50019 (zone 1 & 2) EEx'nA' to BS EN50021 (zone 2) and NEMA 4X (CSA, UL & FM class 1, div 2). Glass Reinforced Polyester Enclosures The BPG range is suitable for a wide range of ambient conditions. Hazardous Area certified enclosures are suitable for...
Open the catalog to page 4MR - DIN Standard Mounting Rail MF - External Mounting Feet MP - Component Mounting Plate TP - Tamper Proof Screws AS - Allen Head Fixing Screws EC - Earth Continuity Plate C - Carbon Loaded (see note 1) The following table is a list of the available accessories suitable for particular standard sizes of BPG enclosures. Care should be taken when ordering accessories for use with enclosures intended for hazardous areas to ensure that compliance with certification is retained. Part Number Glass Reinforced Polyester Enclosures Ordering Example; BPG8 EX EC EB MR (BPG8 EX Certified with Earth...
Open the catalog to page 5Glass Reinforced Polyester Enclosures Copper earth continuity plate (must also be fitted with earth stud) Earth Stud (either brass or stainless steel) Allen Head fixing screws (grade 316) Tamper-proof screws External hinges Component mounting plate (tufnol as standard, steel an option) External mounting feet (stainless steel 316) Internal Earthing bar (can be fitted with clamps) DIN standard mounting rail (TS15, TS32 or TS35)
Open the catalog to page 6Glass Reinforced Polyester Enclosures Glass Reinforced Polyester Enclosures Application Hazardous and Industrial areas Protection Degree IP66 or 67 Certification ATEX & IECEx (Zone 1 & 2; Zone 21 & 22) TR CU NEMA 4X (CSA, UL & FM) Class 1 Division 2 Material Glass Reinforced Polyester (RAL7001 grey) or Carbon Loaded Glass Reinforced Polyester (Black) Temperature Rating Hazardous Area: Non Hazardous: Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm) Calculations do not include the use of end stops, end plates and separators. Check that the enclosure can...
Open the catalog to page 7BPG1 / BPGc1 Glass Reinforced Polyester Enclosures Technical Drawing All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
Open the catalog to page 8Glass Reinforced Polyester Enclosures Glass Reinforced Polyester Enclosures Application Hazardous and Industrial areas Protection Degree IP66 or 67 Certification ATEX & IECEx (Zone 1 & 2; Zone 21 & 22) TR CU NEMA 4X (CSA, UL & FM) Class 1 Division 2 Material Glass Reinforced Polyester (RAL7001 grey) or Carbon Loaded Glass Reinforced Polyester (Black) Temperature Rating Hazardous Area: Non Hazardous: Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm) Calculations do not include the use of end stops, end plates and separators. Check that the enclosure can...
Open the catalog to page 9BPG2 / BPGc2 Glass Reinforced Polyester Enclosures Technical Drawing All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
Open the catalog to page 10Glass Reinforced Polyester Enclosures Glass Reinforced Polyester Enclosures Application Hazardous and Industrial areas Protection Degree IP66 or 67 Certification ATEX & IECEx (Zone 1 & 2; Zone 21 & 22) TR CU NEMA 4X (CSA, UL & FM) Class 1 Division 2 Material Glass Reinforced Polyester (RAL7001 grey) or Carbon Loaded Glass Reinforced Polyester (Black) Temperature Rating Hazardous Area: Non Hazardous: Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm) Calculations do not include the use of end stops, end plates and separators. Check that the enclosure can...
Open the catalog to page 11BPG3 / BPGc3 Glass Reinforced Polyester Enclosures Technical Drawing All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
Open the catalog to page 12Glass Reinforced Polyester Enclosures Glass Reinforced Polyester Enclosures Application Hazardous and Industrial areas Protection Degree IP66 or 67 Certification ATEX & IECEx (Zone 1 & 2; Zone 21 & 22) TR CU NEMA 4X (CSA, UL & FM) Class 1 Division 2 Material Glass Reinforced Polyester (RAL7001 grey) or Carbon Loaded Glass Reinforced Polyester (Black) Temperature Rating Hazardous Area: Non Hazardous: Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm) Calculations do not include the use of end stops, end plates and separators. Check that the enclosure can...
Open the catalog to page 13BPG4 / BPGc4 Glass Reinforced Polyester Enclosures Technical Drawing All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
Open the catalog to page 14Glass Reinforced Polyester Enclosures Glass Reinforced Polyester Enclosures Application Hazardous and Industrial areas Protection Degree IP66 or 67 Certification ATEX & IECEx (Zone 1 & 2; Zone 21 & 22) TR CU NEMA 4X (CSA, UL & FM) Class 1 Division 2 Material Glass Reinforced Polyester (RAL7001 grey) or Carbon Loaded Glass Reinforced Polyester (Black) Temperature Rating Hazardous Area: Non Hazardous: Terminal Populations (Maximum Number of Rails = 1) Drilling Envelope Dimensions (mm) Calculations do not include the use of end stops, end plates and separators. Check that the enclosure can...
Open the catalog to page 15All A2S Advanced Safety Solutions catalogs and technical brochures
-
A2S’s Company Profile
10 Pages
-
Series PSDC PRESSURE SENSOR
3 Pages
-
Lighting
35 Pages
-
Telephony & Communication
16 Pages
-
Automation
6 Pages
-
Installation & Control
15 Pages
-
Telecommunications
25 Pages