Ibarmia Drill Catalog 8-10 9/21/10 12:52 PM Page 22 Model Description: 7044 Coolant System with separate tank (all models) 7022 Worklight with magnetic base (all models) PST Cycle or spindle turn START foot pedal PSR Spindle reverse foot pedal (for tapping) MCC-KT Cross Slide Table 13.8" x 10.8" (K/T Series) MCC-ZX Cross Slide Table 15" x 8.7" (Z/X Series) MB-5D Cross Slide Table 16" x 12" (X model 35/A/B Series) SeriesT (Factory Installed only) PKA Floor Cabinet with 2 shelves PKB Floor Cabinet with door and drawer SeriesZ (Factory Installed only) MGI-Z Tilting Rotating Table TAK-Z Digital rpm read-out (V models only) UC-Z Union, dragging cone and assembly for multi-spindle head PST Cycle or spindle turn START foot pedal PSR Spindle reverse foot pedal (for tapping) (Factory Installed only) Rotating table (X-32 Models) Tilting Rotating Table Automatic pitch controlled tapping with single speed brake-motor Automatic pitch controlled tapping with pneumatic rapid approach Master guide spindle and nut set for automatic pitch controlled tapping Union, dragging cone and assembly for multi-spindle head RS Automatic feed reversing system for tapping. (standard on series T/Z/X/A/B-RS models) SeriesA/B RPF-A RPF-ANR-A HGP-A ACNL-B ACNL-S-B ACNL-RPF-B AR-A DLM-A CN-A UC-A GM-A PM-B SC-B (Factory Installed only) Automatic pitch controlled tapping with single speed brake-motor Automatic pitch controlled tapping with pneumatic rapid approach Master guide spindle and nut set for automatic pitch controlled tapping Pneumatic counterbalance with rapid approach and retreat Pneumatic counterbalance with rapid approach and retreat for tube and profile drilling Pneumatic counterbalance with rapid approach and retreat with controlled tapping 50% lower feed rate range Mechanical spotface device Pneumatic counterbalance for spindle return Union, dragging cone and assembly for multi-spindle head Multi-spindle head guide rod Start-stop and emergency stop pendent control 8" column riser RPF-ANR Automatic pitch controlled tapping with pneumatic rapid approach. (standard on series X/A/B models) RPF Automatic pitch controlled tapping with single speed brake-motor. (for series X/A/B models) MGM rotating table with 3 T-slots on one side and a vise on the other for model Z34 & X34 MG Rotating table with 3 T-slots. (for series Z/X-32 models standard on all other models) MGI Rotating table with 3 T-slots and tilting support. (for series Z/X/A/B models)

Ibarmia Drill Catalog 8-10 9/21/10 ACNL Pneumatic counterbalance for automatic drilling cycle with rapid approach, working feed and rapid retract. (for series B models) ACNL-S Pneumatic counterbalance for automatic drilling cycle with two rapid approaches, and rapid retract, for tube and profile drilling. (for series B models) Assembly for Multi-Spindle Heads ACNL Automatic drilling cycle with rapid approach, working feed and rapid retract, with additional pneumatic counterweight function for the multi-spindle head. UC Union, dragging cone and assembly of the multi-spindle head. CM Multi-spindle...