«£» I BARM IA Series Z Belt-drive Round-column Drills With Manual or Mechanical Clutch Select the Z series step pulley or variable speed belt-drive Industrial Drilling Machine that is right for the job. The SZ-32 model is equipped with manual feed and step pulley drive, the AZ-32V model is equipped with a mechanical clutch and mechanical variable speed drive. Standard Features and Equipment: • Drilling capacity in steel: up to 1.26" (32mm) maximum • Drilling capacity in cast iron: up to 1.38" (35mm) maximum • Tapping capacity in steel: up to .87" (30mm) maximum • Tapping capacity in cast iron: up to 1.18" (30mm) maximum • Automatic feed reversing system for tapping on “RS” models • Machine base with 2 T-slots, coolant tank and pump • Large worktable with 3 T-slots, • Feed crank wheel for manual feed • Depth scale and adjustable depth stop • Automatic tool ejector • Spindle reversing switch • Work Light • Built-in low voltage electrical equipment in machine head • Emergency STOP • Drill guard with microswitch

Capacities, Specifications and Dimensions Standard Models Auto feed reversing “RS” Models Standard motor: 2 Speed 900/1800 rpm Model Spindle speeds (rpm) “RS” models are equipped with automatic feed reversing system for tapping. Standard Fixed Table Models Model Description (Dimension see page 21) 1AZ32VRS 23.6" (600mm) drill with Fixed Table and Tapping System SZ-32 model is equipped with manual feed and step pulley drive AZ-32V model is equipped with a mechanical clutch and mechanical variable speed drive