0 I BARM IA Series Z Belt-drive Round-column Drills With Manual, Mechanical Clutch or Electromagnetic Clutch Feed Control Select the Z series electronic variable speed belt-drive Industrial Drilling Machine that is right for the job. SZ models are equipped with manual feed, AZ models are equipped with a mechanical clutch automatic feed control and the BZ models are equipped with electromagnetic automatic feed control. Standard Features and Equipment: • Drilling capacity in steel: up to 1.57" (40mm) maximum • Drilling capacity in cast iron: up to 1.77" (45mm) maximum • Tapping capacity in steel: up to 1.30" (33mm) maximum • Tapping capacity in cast iron: up to 1.54" (39mm) maximum • Automatic feed reversing system for tapping • Digital rpm counter • Machine base with 2 T-slots, coolant tank and pump • Large rotating worktable with 3 T-slots, • Feed crank wheel for manual feed • Depth scale and adjustable depth stop • Automatic tool ejector • Spindle reversing switch • Work Light • Built-in low voltage electrical equipment in machine head • Emergency STOP • Drill guard with microswitch

Capacities, Specifications and Dimensions Standard Models Standard motor: 1800 rpm Optional spindle motors Model Spindle speeds (rpm) Motor Speed range Standard Fixed Table Models Model Description (Dimension see page 21) 1SZ-34 23.6" (600mm) drill with Fixed Table and Tapping System 1AZ-34 23.6" (600mm) drill with Fixed Table and Tapping System 1BZ-34 23.6" (600mm) drill with Fixed Table and Tapping System 1SZ-40 23.6" (600mm) drill with Fixed Table and Tapping System , 1AZ-40 23.6" (600mm) drill with Fixed Table and...