Gear-drive Round-column Drills With Manual or Mechanical Clutch The X series range of easy to operate Industrial Drilling Machines offer a variety of capacities and feeds. Engineered for a long work life the X series drills are a great value. SX models are equipped with manual feed, AX models are equipped with a mechanical clutch automatic feed control. Standard Features and Equipment: • Drilling capacity in steel: up to 1.26" (32mm) maximum • Drilling capacity in cast iron: up to 1.38" (35mm) maximum • Tapping capacity in steel: up to .87" (18mm) maximum • Tapping capacity in cast iron: up to 1.18" (22mm) maximum • Automatic feed reversing system for tapping on “RS” models • Hardened and ground high quality steel gears • Speed plate and selecting levers on front of head • Gear box lubrication by automatic pump • Machine base with 2 T-slots, coolant tank and pump • Large worktable with 3 T-slots • Feed crank wheel for manual feed • Depth scale and adjustable depth stop • Automatic tool ejector • Work Light • Built-in low voltage electrical equipment in machine head • Emergency STOP • Drill guard with microswitch

Ibarmia Drill Catalog 8-10 9/21/10 Optional spindle motors Motor Speed range Description (Dimension see page 21) 23.6" (600mm) drill with Fixed Table 23.6" (600mm) drill with Fixed Table and Tapping System 23.6" (600mm) drill with Fixed Table 23.6" (600mm) drill with Fixed Table and Tapping System “RS” models are equipped with automatic feed reversing system for tapping.