The A series of Industrial Drilling Machines are capable of handling heavier workpieces with a wide range of drilling and tapping capacities. Designed for easy operation with a mechanical clutch for precise automatic feed control that can be activated from the feed crank handle or by the lever on the front of machine head. Standard Features and Equipment: • Drilling capacity in steel: up to 1.97" (50mm) maximum • Drilling capacity in cast iron: up to 2.36" (60mm) maximum • Tapping capacity in steel: up to 1.42" (36mm) maximum • Tapping capacity in cast iron: up to 1.65" (42mm) maximum • Automatic feed reversing system for tapping on “RS” models • Automatic feed and cut-off by mechanical clutch • Hardened and ground high quality steel gears • Speed plate and selecting levers on front of head • Gear box lubrication by automatic pump • Machine base with 2 T-slots, coolant tank and pump • Large rotating table with 3 T-slots • Feed crank wheel for manual feed • Front hand wheel for fine feed work • Depth scale and adjustable depth stop • Automatic tool ejector • Work Light • Built-in low voltage electrical equipment in machine head • Emergency STOP • Drill guard with microswitch Optional MB-5D 18.5" x 11.5" cross slide table

Ibarmia Drill Catalog 8-10 9/21/10 Capacities, Specifications and Dimensions Standard Models Auto feed reversing “RS” Models Optional spindle motors Model Spindle speeds (rpm) A35 95-135-190-267-380-534-750-1065-1500 Model Motor Speed range Description (Dimension see page 21) 29.1" (740mm) with Fixed Table 29.1" (740mm) with Fixed Table and Tapping 29.5" (750mm) with Fixed Table 29.5" (750mm) with Fixed Table and Tapping 29.1" (740mm) with Fixed Table 29.1" (740mm) with Fixed Table and Tapping 29.1" (740mm) with Fixed Table 29.1" (740mm) with Fixed Table and Tapping “RS” models are...