Clausing Precision 10 - 12 - 16 Series Surface Grinders G Longitudinal Hydraulics and Motorized Crossfeed Surface Grinders G Longitudinal Hydraulics, Motorized Crossfeed and Motorized Rapid Up/Down Surface Grinders Model CSG3A1020 shown with optional dresser and coolant/dust system Model CSG3A1228 shown with optional paper/coolant system Outstanding Features... I Column Wide, deep base & honeycomb ribbing are especially suitable for heavy duty grinding. I Construction Table, saddle and base are cast from high grade iron, strongly ribbed. I Spindle Large diameter spindle is supported by four preloaded precision angular contact ball bearings & one NU type Roller bearing for durable, heavy duty operation. I Enlarged Column & Base Enlarged column & base create high stability & rigidity. The maximum height is 18" (460mm) from table surface to the center line of spindle. I Slideways Vertical, cross (double vees) and longitudinal (vee & flat) slideways are coated with Turcite-B, to provide stable movement and durable accuracy. I Automatic Continuous Lubrication System All slideways and screws are fully oiled by automatic continuous lubrication system to minimize wear on slideways & screws. I Cross Feed Ball screw for cross travel, powered by AC motor. I Proximity Has a built-in type (hidden) proximity switch for easy operation. I Table Speed Control Presettable hydraulic table speed control allows operator to pre-set speed rate, enables you to have same speed rate when engaging hydraulic table every time.

2A: Longitudinal Hydraulics and Motorized Crossfeed 3A: Longitudinal Hydraulics, Motorized Crossfeed and Motorized Rapid Up/Down Machine design and specifications are subject to change without notice.