Clausing 20" (508mm) Variable Speed Drills Dial to the best rpm for the tool and material while the job is running, with a Clausing Two Speed Variable Speed Drill Press. Clausing Drills are equipped with a Spindle Guard that locks in an upright position, away from spindle nose, for easy tool changes. Style A Floor Drill with 22” x 19.5” (559 x 495mm) Table, 66" (1676mm) column standard and 1/2" cored T-slots on 9" centers for table and base. • 150 to 2000 rpm... speeds to drill large holes, small holes to spot face, counterbore and ream. • A flip of the switch changes from low range to high range, perfect for production applications with quick change tooling. • Greater capacity, too, with Clausing Two Speed, production rated 1" in cast iron, 3/4" in steel with optional power feed. Handle more jobs ... better, faster with a Clausing 20" (LOW/HIGH drill press). More features for superior performance... • Heavy-duty precision head... all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads. • 3 MT spindle... with 6-1/2" travel, 2-1/2" diameter quill and micrometer depth stop. • 4" column with 3/16" thick wall for great rigidity and accuracy. • Precision ground 22" x 19" oil through table, handles large parts and fixtures. Powerful Countershaft Drive Head & Column Assembly and 20-501 Table Assembly • Three V-belts and a cog belt transmit positive power to the spindle. Clausing’s heavy-duty drive delivers full power to spindle at all speeds.

Clausing 20" (508mm) Drill Specifications & Electrical Options Specifications: Capacity, hand feed Production rated, with optional power feed, 11/2 hp motor Drill to center of circle Spindle nose Spindle travel Column Quill (ground steel) Quill return spring, capacity TABLE, DRILL PRESS Style A Working surface Table slots Table travel, one setting Spindle to table, maximum BASE, DRILL PRESS Style A Working surface, ground Base T-slots Spindle to Base, maximum Optional Electrical Equipment* For Factory Installation Only NOTE: Magnetic starters protect motor against overload, low and no voltage-Thermal...

Clausing 20" (508mm) Multiple Spindle Drill Presses Clausing multiple spindle drills can be custom built with up to four 20" heads. When ordering a multiple spindle drill press use the table model number below, plus the appropriate head and column assemblies for the corresponding number of heads. Mix and match any number of drill heads as your requirements demand. Example: If you wish to have a 3 spindle drill press with three-20" heads you would order (1) 20-503 table assembly and (3) 2286-300 20" head assemblies. Tell us the order to mount the heads and you have the 3-spindle drill you require....

Clausing 20" (508mm) Drill Accessories Programmable Macro-Driller Power Feed No. 2215-1 The Programmable Macro-Driller can be installed on any model of Clausing 20" drill press, either at time of purchase or as a retrofit. It allows you to automate hole drilling and is most effective on deep hole ‘Peck’ drilling. Peck drilling is used to prevent shavings from tangling with the drill bit and breaking it. The up and down motion of ‘peck drilling’ allows the drill to go slightly deeper into the material then withdrawing to pull the chips out of the hole. The Programmable Macro-Driller is easy to...

Clausing/Ibarmia Series T Geared-drive Round Column Drills A heavy-duty Industrial Drilling Machine, designed for easy operation with manual feed Standard Features and Equipment: • • • • • • • • • • • • Drilling capacity in steel: 1" (25mm) maximum Drilling capacity in cast iron: 1.18" (30mm) maximum Tapping capacity in steel: .71" (18mm) maximum Tapping capacity in cast iron: .87" (22mm) maximum Depth scale and adjustable depth stop “RS” models are equipped with automatic feed reversing system for tapping Thermomagnetic switch Spindle reversing switch Automatic tool ejector Emergency STOP High/Low...

Capacities, Specifications and Dimensions: Standard Models Auto feed reversing for tapping models Capacities: Maximum drilling capacity in steel Maximum drilling capacity in cast iron Maximum tapping capacity in steel Maximum tapping capacity in cast iron Drill Head: Spindle taper Quill diameter Spindle travel (drilling depth) Main motor power No. of speeds (see speed charts) Dimensions and Weights: Height (A) Height (A1) Base: length x width (B) Base to spindle (C) Spindle center to column (D) Spindle to Table (E) Minimum Maximum Worktable: length x width (F) Base height (G) Column diameter...

Clausing/Ibarmia Series K Belt-drive Round Column Drills A heavy-duty Industrial Drilling Machine, designed for easy operation with manual feed Standard Features and Equipment: • • • • • • • • • • • • • • Drilling capacity in steel: 1" (25mm) maximum Drilling capacity in cast iron: 1.18" (30mm) maximum Tapping capacity in steel: .71" (18mm) maximum Tapping capacity in cast iron: .87" (22mm) maximum “RS” models are equipped with automatic feed reversing system for tapping “EV” models are equipped with electronic variable speed “EVRS” models are equipped with electronic variable speed and automatic...

Capacities, Specifications and Dimensions: Standard Models Auto feed reversing for tapping models Drill Head: Spindle taper Quill diameter Spindle travel (drilling depth) Main motor power No. of speeds (see speed charts) Dimensions and Weights: Height (A) Height (A1) Base: length x width (B) Base to spindle (C) Spindle center to column (D) Spindle to Table (E) Minimum Maximum Worktable: length x width (F) Base height (G) Column diameter (H) Floor to top of base (I) Cabinet height (J) Net weight Shipping weight Shipping dimension (length x width x height) Capacities: Maximum drilling capacity...