zigbee smart building
zigbee smart building
- The devices measure temperature, humidity, and light, transmitting data to a ZigBee gateway. They offer customizable sampling intervals and data transmission settings to optimize battery life. They are battery-powered, suitable for indoor and outdoor use, and housed in waterproof plastic. The internal antenna provides a radio range of up to 30 meters outdoors.
Applications
- These devices are ideal for building automation, industrial control systems, and energy monitoring and management.
Technical Specifications
- They use the Ember EM250 chip, compatible with IEEE 802.15.4, operating on the ZigBee PRO stack. The radio frequency ranges from 2405 MHz to 2480 MHz with DSSS modulation. Powered by a 3.6 V / 2000 mAh AA lithium battery, they have a lifespan of 3 years under specific conditions. The temperature sensor range is -40 to 120 °C with an accuracy of ±1.5 °C. The humidity sensor range is 0 to 100% RH with an accuracy of ±5 RH%. Light measurement error is ±5% over a range of 10 to 1000 Lux.
Conformity and Standards
- The devices comply with various ETSI and EN standards, including directives for RED, RoHS, and WEEE.
Product Codes and Dimensions
- Product codes include ZED-THL-M for temperature, humidity, and light sensor – Modbus, and ZED-THI-M for temperature and humidity sensor – Modbus. Dimensions and weight vary by model.
Additional Devices
- Additional devices include a ZigBee Modbus Module with digital inputs, a wireless thermostat, ZigBee Modbus pulse counters, and a CO2 sensor with auto-calibration and long-term stability.
- Powered by 4x AA batteries with a life of 1 year, it features 4 indicator LEDs, a default sampling interval of 15 minutes, and measures 0~2,000 ppm CO2 (optional up to 10,000 ppm) with an accuracy of ± (4% FS +3% Reading). It is wall-mounted and operates between 0 to +50 °C with IP30 protection.
- Features 2 digital inputs, 1 NTC probe, 2 relay outputs, and customizable sampling intervals. It is used in building automation and energy monitoring, powered by 24 VDC with Italian or UK standard plugs.
- Includes a built-in energy meter with a max power of 13 A @ 230 VAC, functions as a router, stand-by killer, and override, and supports Modbus protocols. Available in Schuko (EU), UK, FR, IT standards.
- Similar to the smart plug, it includes a built-in energy meter with a max power of 13 A @ 230 VAC, functions as a router, stand-by killer, and override, and is wall-mounted. It supports Modbus protocols.
- Connects third-party Modbus/RTU devices to the ZigBee network, features an RS485 interface for PLC/Scada connection, functions as a ZigBee signal repeater, and is powered by 12-24 VDC with an Italian standard plug.
- Extend the range of wireless devices and function as a parent for battery-powered sensors, powered by 90 to 250 VAC.
- All devices conform to ETSI EN 300 328, EN 301 489-1, EN 301 489-17, EN 61000-6-2, EN 61000-6-3, EN 60950-1, EN 62479, and relevant EU directives.
Catalog excerpts
zigbee smart building Zigbee wireless diveces for energy saving and comfort living Ideal for: – temperature, humidity and light sensors – CO2 sensors – NTC temperature probes – single-phase and three-phase energy meters
Open the catalog to page 1
zigbee smart building A line of devices based on ZigBee technology for projects focused on energy saving and environmental comfort. Dedicated to system integrators on the lookout for wireless solutions offering low energy consumption and high reliability, our ZigBee radio devices guarantee extensive radio coverage creating mesh type networks. Wireless sensors, for energy and comfort Thermostats, energy meters, temperature, presence, brightness and CO2 sensors, smart plugs, switches incorporating energy and power meters: a complete catalogue of wireless devices for smart building projects focused...
Open the catalog to page 2
BlackBox – ZigBee Ethernet Modbus Gateway ZigBee RS485 Modbus Gateway Energy Meter 1~ ZigBee Modbus ZigBee Modbus Energy Meter 3~ / 6~ ZigBee Modbus Temperature, humidity and light sensors TID – ZigBee Modbus Module with digital inputs TTR2 – ZigBee Modbus wireless thermostat ZigBee Modbus Pulse counters Modbus CO2 Sensor TIR2 – ZigBee Modbus Relay Module Modbus Smart Plug Modbus Smart Switch ZigBee Modbus Bridge ZigBee Modbus radio repeaters ZigBee smart building
Open the catalog to page 3
BlackBox – ZigBee Ethernet Modbus Gateway BlackBox is a ZigBee Modbus gateway with an Ethernet connection, and is mainly used to route data from ZigBee sensors monitoring environment and energy parameters and to control electrical devices and/or signalling systems. BlackBox connects ZigBee low energy wireless device networks (comprising sensors, actuators, pulse counters, etc.) to cabled networks via Modbus TCP/IP protocol. The device also permits asynchronous data acquisition from network nodes and high efficiency transmission direct to the supervisor. Modbus protocol gateways ensure the easy...
Open the catalog to page 4
BlackBox CONNECTION DIAGRAM ModBus sensor ModBus sensor radio repeater ModBus sensor third-party ModBus devices (general purpose I/O, power meter, regulator) TECHNICAL SPECIFICATIONS Type General specifications Radio specifications Antenna Power supply Status display Connections Mounting Ambient parameters Features – Silicon Labs chip – Compatible with IEEE 802.15.4 – Stack EmberZnet 6.4.1 – Modbus / RTU – Frequency: 2405 MHz to 2480 MHz – Modulation: DSSS – Nominal transmission power: 10 dBm – Receiver sensitivity -90 dBm – External with 2 dB gain – Radio range: max 50 m outdoors – SMA-RP antenna...
Open the catalog to page 5
CODE Product Code ZC-GW-BB-EM Description BlackBox – ZigBee Modbus Gateway with Ethernet connection ZigBee smart building - +80A000131R1.0 - 2020|07|29
Open the catalog to page 6
Gateway ZigBee ZigBee RS485 Modbus Gateway These gateways are mainly used to route data from sensors monitoring environment and energy parameters and to control electrical devices and/or signalling systems. They connect ZigBee low energy wireless device networks (comprising sensors, actuators, pulse counters, etc.) to cabled networks via Modbus RS485 protocol. These gateways also permit asynchronous data acquisition from network nodes and high efficiency transmission direct to the supervisor. Modbus protocol gateways ensure the easy integration of ZigBee wireless devices with third party systems...
Open the catalog to page 7
Gateway ZigBee CONNECTION DIAGRAM ModBus sensor ModBus sensor radio repeater ModBus sensor third-party ModBus devices (general purpose I/O, power meter, regulator) TECHNICAL SPECIFICATIONS Type General specifications Radio specifications Antenna Power supply Features – Ember EM3587 chip – Compatible with IEEE 802.15.4 – Stack EmberZnet 5.3.1 (ZigBee PRO) – Modbus / RTU – Frequency: 2405 MHz to 2480 MHz – Modulation: DSSS – Nominal transmission power: 1 mW (0 dBm) – Receiver sensitivity: -92 dBm – External with 5.5 dB gain – Radio range: max 70 m outdoors – SMA-RP antenna connector – ZC-GW-P485-EMxx...
Open the catalog to page 8
Gateway ZigBee Type Insulation Conformity CODES Products Description Modbus RS485 gateway; 12 to 24 VDC power supply; Italian standard power plug Modbus RS485 gateway; 230 VAC power supply; UK standard power plug ZC-GWP485D-EM Modbus RS485 gateway for DIN rail; 230 VAC power supply ZigBee smart building - +80A000131
Open the catalog to page 9
Energy Meter 1~ ZigBee Modbus Wireless energy meter for measuring the power of a load/single phase line up to 15 kW using a split core current transformer (TA) In industrial applications, the device can be used to monitor a production line or a lighting line inside or outside a section. The device is fitted with a digital output for controlling an external, high power relay. Thanks to continuous power, the device can also function as a ZigBee signal repeater and as a parent device for battery powered sensors. Energy Meter 1~ for one single phase line up to 15 kW – Modbus MAIN TECHNICAL SPECIFICATIONS...
Open the catalog to page 10
Energy Meter 1~ CONNECTION DIAGRAM ModBus sensor ModBus sensor ModBus sensor third-party ModBus devices (general purpose I/O, power meter, regulator) TECHNICAL SPECIFICATIONS Tipo General specifications Radio specifications Caratteristiche – Chip Ember EM3587 – Compatible with IEEE 802.15.4 – Stack EmberZnet 5.3.1 (ZigBee PRO) – Modbus / RTU – Frequency: 2405 MHz to 2480 MHz – Modulation: DSSS – Nominal transmission power: 2 mW (3 dBm) – Receiver sensitivity: -95 dBm – Radio range: – 50 m outdoor – 20 m indoor Power supply Max current Status display Sampling / data transmission time Measurements...
Open the catalog to page 11
Energy Meter 1~ Tipo Degree of protection Insulation Conformity – ETSI EN 300 328 – ETSI EN 301 489-1 – ETSI EN 301 489-17 – EN 61326-1 – EN 61010-1 – EN 62479 – Directives 2014/53/EU (RED) 2011/65/EU (RoHS) 2012/19/EU (WEEE) 1999/519/EC CODE Product Code ZR-HM.D-M Description Energy Meter 1~ for one single phase line up to 15 kW – Modbus ZigBee smart building - +80A000131R1.0 - 202
Open the catalog to page 12All 4neXt catalogs and technical brochures
aMBition manual10 Pages
EasyNET quick start2 Pages
EasyNET manual23 Pages
MDB-W manual12 Pages
MDB-W quick start2 Pages
MDB-E quick start2 Pages
MDB-E manual15 Pages
NetLink quick start2 Pages
NetLink manual15 Pages
EasyLog quick start2 Pages
EasyLog manual24 Pages
NetLink1 Page
MQTT2 Pages
MDB-E1 Page
aMBition brochure1 Page
MDB-W1 Page
EasyNET2 Pages
owa4502 Pages
owa4Xplatform2 Pages
EasyLog XL quick start2 Pages
EasyLog XL manual24 Pages
EasyLog XL brochure2 Pages
I/O Acquisition Modules1 Page
owa3Xplatform2 Pages
ModBridge1 Page
- Management software solution
- Automation software solution
- Data logger
- Digital I/O
- IO module
- Cloud-based software
- Temperature datalogger
- Analog I/O
- Digital IO module
- Communication gateway
- Industrial software
- Interface software
- Visualization software solution
- Industrial gateway
- Fieldbus gateway
- Ethernet gateway
- Wireless datalogger
- Fieldbus I/O module
- Datalogger without display
- Serial gateway