owa450 TAKE COMPLETE CONTROL OF REMOTE DATA COLLECTION AND PROCESSING THE owa450 IS THE PERFECT PLATFORM FOR CONTROLLING AND MONITORING YOUR INDUSTRIAL MACHINES AND VEHICLES owa4X Core: – LINUX Kernel 4.14.67 – Debian 9 Distribution File System – ARM Cortex A8 32 bit 800MHz – 512MB DDR3 – 1GB NAND Flash – Access to Debian Standard Repositories Key Features: – IP40 Enclosure – CAN (up to 4 interfaces) – Kline (up to 2 interfaces) – RS485 (up to 2 interfaces) – Programable 3 Axis Accelerometer – 8 digital output open drain 200mA. – 2 digital output high side 1A. – 10 digital input 0 to 50V. – 3 additonal optional digital input. – 4 analog input, 0 to 5,12V or 0 to 30,72V – 5V voltage output – 3 RS232 (TX, RX) interface – Ethernet 100Mbps - RJ45 or M12 connector – MicroSD – Micro SIM – USB 2.0 – Programmable 9 Axis sensor (optional) Accelerometer/Gyroscope/Magnetometer. Wireless Interfaces: – GNSS (GPS + GLONASS) – CELULAR COMMUNICATIONS – LTE Cat 1 with 3G and 2G fallback – Region: Global (Worldwide) – WiFi 802.11 a/b/g/n/ac – BT 4.2 Wireless Embedded Computer CUSTOMER APPLICATION OWASYS SOFTWARE OWASYS HARDWARE

owa450 TECHNICAL SPECIFICATIONS • CPU – ARM Cortex A8 at 800MHz clock speed. – Linux Kernel 4.14.67 – Debian File System – NAND FLASH 1GByte. – DDR3 512MBytes. – MicroSD card holder for additional storage. • GNSS • Power supply – Nominal range of 9 V to 48 V. – Typical consumption at 24V: OFF Standby RUN RUN + GSM + GPS – Receiver: GPS/GLONASS/QZSS/BeiDou. – 72-channel* continuous tracking receiver. – GALILEO E1B/C ready.* – SBAS: WAAS, EGNOS, MSAS, GAGAN. – Update Rate: 10Hz. – Accuracy: 2 meters CEP. – Signal Acquisition: Cold Start: 26 s. Hot Start: < 1.5 s. – Signal Reacquisition: < 1 s....