MDB-E MDB-E is a bidirectional converter between the Ethernet communication channel and RS232 / RS485 serial channels. Therefore, it allows all devices equipped with a serial port to communicate with software or cards on Ethernet communication. MDB-E also acts as an RS232 / RS485 converter. Thanks to the NFC interface (Near Field Communication) the configuration is very simple and practical. A dedicated APP allows you to read, modify and set all device parameters. The galvanic isolation of the serial ports ensures protection for all connected instruments and is a guarantee of isolation from the rest of the system. Technical features GENERAL • Ethernet 10/100 MB/s • Optoisolated RS485 • Optoisolated RS232 (Rx, Tx, GND) • Serial communication speed up to 115.200 bit/s • Power supply 9-32VDC • Average consumption 30mA MECHANICAL • IP41 plastic container for DIN rail mounting • Size: 17,5 x 86 x 58 mm (1 DIN module) SOFTWARE • ModBus TCP/ModBus RTU conversion on RS485 • ModBus TCP/ModBus RTU conversion on RS232 • ModBus RTU RS485/R232 conversion • Bidirectional protocol conversions on all channels • Easy and fast configuration through APP • Default parameters: IP: 192:168.1.100 DHCP disabled 9600 bps ENVIRONMENTAL • Operating temperature: -20°C ^ +60°C • Relative humidity: from 0 to 80% without condensation • Storage temperature: -40°C ^ +80°C 4neXt S.r.l.s. - Via L.Da Vinci, 15 30030 - Vigonovo (VE) - ITALY Tel: +39 049 0981450 [email protected] www.4