Catalogs >
4B Braime Components >
WDB2 Bearing Temperature Sensors

WDB2 Bearing Temperature Sensors
1 / 2Pages

Catalog excerpts

Product Information Bearing Temperature Sensors WDB2 Series – Conduit Entry Bearing Temperature Sensors APPLICATION For use on any application where bearing temperature monitoring is required. METHOD OF OPERATION The WDB2 series bearing sensors are designed to screw directly into a bearing housing. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor. The WDB2 series have a 1/8” NPT thread. Three versions are available; an NTC thermistor or platinum RTD type for continuous temperature monitoring, and a PTC thermistor model with the following trip points (specify when ordering): 60°C, 70°C, 80°C and 90°C The sensor is supplied with a three meter attached cable and can be connected to a PLC or to a hazard monitoring system, such as 4B’s T500 Hotbus Elite, Watchdog Super Elite, or T400 Elite. WDB20V3CAI (NTC Thermistor) (CSA / NRTL Class II Div 1 ATEX and IECEx Zone 20 Approved) The connections are not polarity sensitive therefore special connection requirements are eliminated, and the cable can be extended in the field. FEATURES ► Screw in Positive Mount Installation ► Grease Zerk for Bearing Lubrication ► NTC Version - Continuous Temperature ► PTC Version - Trip Points from 50°C to 90°C ► PT100 Version - Platinum RTD ► CSA / NRTL Class II Div.1 / ATEX and IECEx Zone 20 Approved Part Number WDB23V3CAI (PTC Thermistor) (CSA / NRTL Class II Div 1 ATEX and IECEx Zone 20 Approved) Thermistor Type ATEX Zone Continuous Temperature Monitoring Continuous Temperature Monitoring Detailed specification, wiring diagrams and installation/operating instructions available upon request.

Open the catalog to page 1

Product Information Bearing Temperature Sensors BRAIME 1/8” NPT Taper Thread Sensor with Grease Zerk Sensor Installed on Conveyor Bearing Installation of Bearing Temperature Sensor Example of Bearing Failure TECHNICAL SPECIFICATIONS WDB1 and WDB2 Series Bearing Temperature Sensors NTC Sensors Resistance at 25°C: 10,000 Ohms Resistance at 60°C: 2,487 Ohms Resistance at 90°C: 916 Ohms Sensing Voltage: 5 to 24 VDC Current Draw: 1 mA PTC Sensors Resistance at 60°C: ≤ 250 Ohms Resistance at Trip Point: ≥ 2,000 Ohms Sensing Voltage: 5 to 25 VDC Current Draw: 20 mA PT100 Sensors Resistance at 0°C:...

Open the catalog to page 2