Catalogs >
4B Braime Components >
RLI Shaker - Rotary Level Indicator

RLI Shaker - Rotary Level Indicator
2Pages

Catalog excerpts

Product Information RLI Rotary Level Indicator APPLICATION The RLI “Shaker” rotary paddle switch is used to detect high / low levels of bulk granular solids in bins, tanks and silos. It can also be used to detect plug conditions in spouts, where long life and failsafe detection is required. METHOD OF OPERATION Utilizing a unique stepper motor drive, the RLI “Shaker” rotates clockwise, then counter-clockwise and then shakes to shed any excess material build up. If the paddle rotation is impeded at any time by the bulk material then the electronic circuit provides a signal for level indication or control. The RLI “Shaker” uses fewer mechanical parts compared with standard rotary level indicators. No gearbox or clutch is required as the stepper motor drive is directly coupled to the output shaft and is practically indestructible and cannot be damaged by forced or backwards rotation. Also, an adjustable torque control allows one unit to cover many different densities of material, and provides easy on site calibration without having to change paddles. RLI “Shaker” Patent Pending FEATURES ► Shaking Action for Shedding Material Build Up ► User Adjustable Torque Control ► Direct Stepper Motor Drive ► No clutch and No Gearbox ► Failsafe Rotation Detection ► Glass Fibre Reinforced Nylon Housing ► Vertical Extensions to 2m (maximum) wire rope ► Built In Adjustable Timer Mounting Options (Top & Side) PART NUMBERS/ACCESSORIES ► RLIS1V46A RLI “Shaker” 110/240 VAC or 24 VDC (Universal Supply) Side Mounting Plate 1” BSP Top Mounting Plate 1” BSP Spring loaded twin blade paddle stainless steel RLISEXC extension cable 2m stainless steel Detailed specification, wiring diagrams and installation/operating instructions available immediately upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. Dec 2018.

Open the catalog to page 1

Product Information TECHNICAL SPECIFICATIONS WITH SHAFT EXTENSION mm EXTERNAL GROUND CONNECTION CONDUIT ENTRY TAPPED 20MM MOUNTING PLATE SMP/1 & TMP/1 205mm Diameter 2m Maximum Wire rope *'s-. Please refer to instruction manual for correct installation. Information subject to change or correction. Dec 2018.

Open the catalog to page 2