Catalogs >
4B Braime Components >
RG4 Rotary Level Sensor

RG4 Rotary Level Sensor
6Pages

Catalog excerpts

Product Datasheet BRAIME COMPONENTS RG4 Rotary Level Indicator Approved for explosive atmospheres: ATEX zones 20 and 21 for dust Application: Designed to indicate the presence or absence of bulk materials such as grains, pellets, chemicals, wood chips, and other powders. It is ideal for hoppers and silos. The RG4 can be top and side mounted. Method of operation: The detection of material is achieved by a rotating paddle. If material impedes the rotation of the paddle, the motor topples on its axis and triggers an alarm Features: • An EASY TO INSTALL instrument that does not require any calibration, maintenance or specific tool for its installation. • Thanks to the wide choice of paddles, all of which are interchangeable, it is ADAPTABLE to the different densities of the measured materials. • Extremely VERSATILE, it can be installed on tanks, hoppers, on walls or roofs of silos, in a vertical, horizontal or oblique position. • CUSTOMIZABLE with paddles, extensions, voltages. • Protection degree of enclosures for electrical equipment IP65. • DURABLE and RELIABLE with aluminium casing, stainless steel shaft on ball bearings and electrical connection with tension clamp or screw terminals. Works with operating temperatures from -20° to +70°C for the standard versions and -20° to +200°C for the high temperature versions. • Push-fit or screw terminal options. Part Numbers: RG4V56A-P 110/240 VAC Push-fit terminal block - Male thread 1 1/2" BSPP 24 VDC Push-fit terminal block - Male thread 1 1/2" BSPP 110/240 VAC Screw terminals - Male thread 1 1/2" BSPP 24 VDC Screw terminals - Male thread 1 1/2" BSPP Detailed specification, wiring diagrams and installation/operating instructions available upon request. For high temp versions add –HT to the end of the part code* Please refer to instruction manual for correct installation. Information subject to change or correction. Jan 2020

Open the catalog to page 1

Product Datasheet BRAIME COMPONENTS TECHNICAL SPECIFICATIONS Model Change over relay 5A at 250VAC Change over relay 5A at 250VAC 1 x conduit entries tapped ø 1/2” BSPP 1 x conduit entries tapped ø 1/2” BSPP Die-cast aluminium casing Die-cast aluminium casing Operating temperature range Standard: -20°C + 70°C High Temp: -20°C + 200°C Standard: -20°C + 70°C High Temp: -20°C + 200°C Power supply Output Mounting Conduit Entry Protection Certificates and approvals ATEX Zone 20 / Zone 21 ATEX Zone 20 / Zone 21 Note: All dimensions are given in mm. Detailed specification, wiring diagrams and...

Open the catalog to page 2

Product Datasheet BRAIME COMPONENTS Paddle Options Part Number Recommended Density * Install with flange of from within silo 1 x 304 Stainless Steel blade 1 x 304 Stainless Steel blade 4 x 304 Stainless Steel blades * Install with flange of from within silo 4 x 304 Stainless Steel blades * Install with flange of from within silo 1 x 304 Stainless Steel blade Detailed specification, wiring diagrams and installation/operating instructions available upon request. Material Weight Please refer to instruction manual for correct installation. Information subject to change or correction. Jan 2020

Open the catalog to page 3

Product Datasheet BRAIME COMPONENTS Extension Options Stainless Steel Extension Rod (Without Guard) Part No.: RGEXT-0500-SS (L1 = 500mm) Part No.: RGEXT-1000-SS (L1 = 1000mm) Part No.: RGEXT-1500-SS (L1 = 1500mm) Standard Length Stainless Steel Extension Rod (With Guard) Part No.: RGEXT-0500-SS-G (L1 = 500mm) Part No.: RGEXT-1000-SS-G (L1 = 1000mm) Part No.: RGEXT-1500-SS-G (L1 = 1500mm) Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or...

Open the catalog to page 4

Product Datasheet BRAIME COMPONENTS Extension Options (cont.) Flexible Extension Part No.: RGEXT-2000-SS-W (L1 = 2000mm) Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. Jan 2020

Open the catalog to page 5

Product Datasheet BRAIME COMPONENTS Flange Options Part Number Standard aluminium flange 1 ½” BSP External diameter = ø 140mm Hole centers = ø 120mm Hole spacing = 4 x equidistant ø 7mm holes Stainless Steel flange 1 ½” BSP External diameter = ø 140mm Hole centers = ø 120mm Hole spacing = 4 x equidistant ø 7mm holes Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. Jan 2020

Open the catalog to page 6