Product Datasheet BRAIME COMPONENTS RG1 LEVEL SENSOR Approved for explosive atmospheres: ATEX zones 20 and 21 for dust Application: • Designed to indicate the presence or absence of bulk • materials such as grains, pellets, chemicals, wood chips, and other powders. It is ideal for hoppers and silos Can be top and side mounted Features: • The detection of material is achieved by a rotating paddle. If material impedes the rotation of the paddle, the motor topples on its axis and triggers an alarm • The RG1 has a variety of compatible paddles which offer the ability to detect a wide range of products • Optional extensions and shard guards make installation easier and cater for more challenging applications Part numbers: • RG1V4A – 24VDC supply voltage • RG1V56A – 110VAC to 240VAC supply voltage Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. Jan 202

Product Datasheet BRAIME COMPONENTS RG1 PARTS & ACCESSORIES Part number PADDLES Description Single Vane Nylon Paddle ø120 x 100 mm. 3 Vanes NYLON Paddle ø120 x 65 mm. Stainless Steel Vane ø120 x 100 mm. 4 VanesStainless Steel ø100 x 60 mm. For heavier materials. 4 Vanes Stainless steel. ø138 x 60 mm. Mounting with flange. For lighter materials. 1 Vane Stainless Steel Paddle. Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. Jan 2020

Product Datasheet Please refer to instruction manual for correct installation. Information subject to change or correction. Jan 2020 Detailed specification, wiring diagrams and installation/operating instructions available upon request.

Product Datasheet Model Power supply Output Mounting Conduit Entry Enclosure Operating temperature range Protection Certificates and approvals RG1V56A 24-240 VAC/VDC (50/60Hz) Change over relay 10 A at 250VAC 0 2"1/2 BSPT/Gas Two conduit entries tapped 0 1/2" BSPP Die-cast aluminium casing -20°C + 70°C IP65 ATEX Zone 20 / Zone 21 RG1V4A 24VDC Change over relay 10 A at 250VAC 0 2"1/2 BSPT /Gas Two conduit entries tapped 0 1/2" BSPP Die-cast aluminium casing -20°C + 70°C IP65 ATEX Zone 20 / Zone 21 Note: All dimensions are given in mm. Please refer to instruction manual for correct installation....