PRODUCT DATA SHEET 4B_G.ro.uP IE-NODE (Industrial Ethernet Node 1 & 2) Remote Sensor Monitoring Interface for PLC’s & Automation Systems APPLICATION The Industrial Ethernet Node (IE-NODE) is a remote monitoring interface designed to provide sensor data to PLC’s or other automation and control systems. DESCRIPTION The IE-NODE is available in two versions, both with a total of 10 sensor inputs. Version 1 has 8 contact or NTC temperature inputs, and 2 pulse or 4-20 mA (current loop) inputs. Version 2 has 10 inputs for 4-20 mA (current loop) sensors. Both units can be expanded to 16 sensor inputs with the installation of optional expansion boards (details overleaf). The IE-NODE operates by reading its sensor inputs and sending processed data when requested by another system (e.g. PLC). The units are equipped with an RJ45 Ethernet socket and supports PROFINET, EtherNet/IP and Modbus TCP/IP protocols for easy integration with Siemens, Allen-Bradley Rockwell, Modicon and other PLC’s or automation devices. The IE-NODE’s network configurator software provides a visual view of all devices on the network. It allows for easy identification of each unit on the network and allows for network settings to be changed as needed. The following 4B sensors are compatible with the IE-NODE (version dependent): Temperature (Bearing & Surface) -• ADB Series (NTC Type) • Milli-Temp Series (4-20 mA) Belt Misalignment -• Touchswitch (Contact) • Rub Block (NTC Type) Belt Speed & Slip -• Milli-Speed Switch (4-20 mA) • P300 Proximity Sensor (Pulse) • P800 Proximity Sensor (Pulse) • M800 Elite Speed Switch (Pulse) IE-NODE 1 (120 to 240 VAC / 24 VDC) IE-NODE 1 (24 VDC) IE-NODE 2 (120 to 240 VAC / 24 VDC) IE-NODE 2 (24 VDC) NTC Expansion Board ETH-NODE-AUXI-6AN Analog Expansion Board 4B Group INDUSTRIAL ETHERNET NODE 1 8 C0NTACT/NTC TEMPERATURE INPUTS 2 PULSED/ANALOG 4-20 mA INPUTS KEY FEATURES • Sensor Interface for PLC’s & Automation Systems • Supports PROFINET, EtherNet/IP and Modbus TCP/IP protocols • Up to 16 Total Sensor Inputs with Available Expansion Boards • Configurator Software for Easy Network Set Up and Visual Overview of All Devices

IE-NODE 2 10 Analog (4-20 mA) inputs NETWORK DIAGRAM SENSOR EXPANSION BOARDS (OPTIONAL) Two expansion boards are available for the IE-NODE to expand total sensor inputs from 10 to 16. 1. The ETH-NODE-AUXI-6NTC expansion board allows for the support of up to 6 additional NTC temperature sensors or6 contact sensors, orany combination of6. 2. The ETH-NODE-AUXI-6AN expansion board allows for up to 6 additional 4-20 mA (current loop) sensors. Both boards add the capability of an RS485 Modbus RTU connection which provides access to all onboard sensor information. Supply Voltage - Copyright © 2019 4B...