Catalogs >
4B Braime Components >
Encoder-Flex 1024 - Rotary Shaft Encoder & Gate Position Monitor

Encoder-Flex 1024 - Rotary Shaft Encoder & Gate Position Monitor
1 / 2Pages

Catalog excerpts

Encoder-Flex 1024 - Rotary Shaft Encoder & Gate Position Monitor - 1

Product Datasheet PRODUCT DATASHEET Rotary Shaft Encoder and Gate Position Monitor APPLICATION The Encoder-Flex 1024 is a rotary shaft encoder that monitors slide gate position, shaft position, or shaft speed. Examples include position of rack and pinion gates, valves, distributors, and shaft speed on rotating shafts such as slow moving conveyors, mixers, and dryers. The Encoder-Flex 1024 uses innovative technology to monitor gate position or shaft speed. The resolution is programmable from 1-1024 pulses per revolution and it consists of 4-20 mA output as well as quadrature pulsed output for directional speed, and a Modbus RTU communications for advanced configuration and diagnostics. There are two status LEDs for easy identification of operational mode and target detection. The unit is quickly calibrated with the touch of a magnet for shaft speed, angular shaft position, or gate position. The sealed body is constructed from stainless steel. Output signals can be wired to a PLC, SCADA system, or other controller for accurate display and control of shaft position and speed. shaft speed, angle, or position 4-20 mA, Quadrature Pulse (Speed/Relative Rotation), and RS485 Modbus RTU ► Programmable resolution from 1 to 1024 Pulses per Revolution ► Compatible with gates with up to 500,000 rotations between closed and open positions ► Connects directly to control systems (PLC, SCADA, Watchdog, IE-Node, etc) ► Memorizes shaft position in the case of a power loss ► Simple magnetic calibration ► Comprehensive software for access to advanced programming and visualization ► Sealed stainless steel enclosure ► LED Status Indicators ► ATEX, IECEx, UKEx Zone 20 Approved ► Class II Div 1 Approved ► Outputs: Encoder-Flex 1024 – M12 Shaft Encoder-Flex 1024 – ½” UNC Shaft Encoder-Flex 1024 – D-Type Shaft Process Tech Display 100-240 VAC with 24VDC sensor power Process Tech Display 24 VDC Display Only USB To RS485 1' Long Converter Copyright © 2023 4B Group. All rights reserved. Information is subject to change or modification without notice. Refer to instruction manual for installation information. CRD02152

Open the catalog to page 1

Encoder-Flex 1024 - Rotary Shaft Encoder & Gate Position Monitor - 2

Product Datasheet PRODUCT DATASHEET WIRE DESCRIPTION TECHNICAL SPECIFICATIONS Power Supply Speed Range 4-20mA Quadrature Pulsed (24VDC Max) Modbus RTU Adjustable 1 to 1024 Pulses Per Revolution Thread Size M12 (Other Sizes Available) Operating Temperature ATEX, IECEx, UKEx Zone 20 Class II Div 1 Groups E, F & G (US & Canada) Conduit Entry Copyright © 2023 4B Group. All rights reserved. Information is subject to change or modification without notice. Refer to instruction manual for installation information. CRD021523

Open the catalog to page 2