Binswitch Elite - Capacitive Blocked Chute / Level Sensor

Product catalog summary

Product Overview: The document provides a datasheet for the Capacitive Blocked Chute/Level Sensor by 4B Braime Components, designed for detecting blocked chute conditions and material levels in explosive atmospheres. It is approved for ATEX and IECEx zones for both dust and gas environments.

Applications: The sensor is used to detect blocked chute conditions and can identify high and low material levels. It features smart calibration to ignore dust build-up.

Features:

Multi-voltage power supply (24-240 VAC/VDC)
Available in 2 and 4 wire versions
IP66 rated for protection
Polycarbonate body with M30 x 1.5 ISO threading
LED indicators for output state
25mm detection range
Easy calibration and polarity selection using a magnet

Technical Specifications:

Model BSE12V10AI: 2-wire, FET output, 100mA switching capacity
Model BSE15V10AI: 5-wire, SPCO relay output, 3A switching capacity
Both models have a detection range of 25mm and operate within a temperature range of -15°C to +50°C
Both models are IP66 rated and certified for ATEX and IECEx Zone 20 and Zone 0

Accessories: The sensor can be mounted with the BAS3 abrasion shield and mounting bracket.

Dimensions: The sensors come with a 3m long cable and have an overall diameter of 6.2mm, with ISO M30 threading.

Catalog excerpts

Binswitch Elite - Capacitive Blocked Chute / Level Sensor-1

Product Datasheet braime COMPONENTS BSE12 and BSE 15 CAPACITIVE BLOCKED CHUTE / LEVEL SENSOR BinSwitch Elite sensor mounted with the BAS3 abrasion shield Approved for explosive atmospheres: ATEX and IECEX zones 20, 21, and 22 for dust; ATEX and IECEx zone 0, 1, and 2 for gas Application: • Detects blocked chute condition • Can detect high and low levels of material • Capacitive sensor with smart calibration to ignore dust build-up Features: • 24-240 VAC/VDC multi voltage power supply • 2 and 4 wire versions available • IP 66 rated • M30 x 1.5 ISO threaded polycarbonate body • Blue and green LED's showing output state • 25mm detection range • Easy calibration with a magnets • Configurable polarity selection with a magnet Part numbers: • BSE12V10AI -2 -wire model • BSE15V10AI -5 -wire model BINSWITCH SENSOR Accessories: • BAS3 -Abrasion shield and mounting bracket Please refer to instruction manual for correct installation. Detailed specification, wiring diagrams and installation/operating instructions available upon request. Information subject to change or correction. June 2018

Open the catalog to page 1

Binswitch Elite - Capacitive Blocked Chute / Level Sensor-2

Product Datasheet braime COMPONENTS BSE12 and BSE 15 TECHNICAL SPECIFICATIONS Power supply Output Number of wires Detection range Switching Voltage Switching Capacity Detection Polarity Operating temperature range Certificates and approvals Protection 24-240 VAC/VDC FET 2 25 mm 24-240 VAC/VDC 100mA Configurable -15°C to +50°C ATEX and IECEx Zone 20, Zone 0 IP66 24-240 VAC/VDC SPCO relay 5 25 mm 60VDC/VAC 3A Configurable -15°C to +50°C ATEX and IECEx Zone 20, Zone 0 IP66 ISO M30 with 1.5mm thread Lock nuts 3m long cable 2 or 5 x 20AWG conductors 6.2mm overall diameter Note: All dimensions are...

Open the catalog to page 2