Catalogs >
4B Braime Components >
Auto-Set Flush Probe - Radio Frequency (RF) Capacitance Plug Switch

Auto-Set Flush Probe - Radio Frequency (RF) Capacitance Plug Switch
1 / 2Pages

Catalog excerpts

Auto-Set Flush Probe - Radio Frequency (RF) Capacitance Plug Switch - 1

Product Datasheet Auto-Set™ Flush Probe Auto-Set Flush Probe TM Radio Frequency (RF) Capacitance Heavy Duty Plug Switch APPLICATION The Auto-Set flush probe is a low profile RF capacitance plug switch level monitor designed for tight fitting applications to detect levels of liquids, powders and free flowing granular solids in conveyors, bucket elevators and surge hoppers. METHOD OF OPERATION The Auto-Set flush probe incorporates simple push-button calibration with microprocessor enable/disable switch for total protection of stored values. Once the Auto-Set is calibrated for the application it never has to be re-calibrated. Data is stored in non-volatile memory so it is not affected by power loss. A four digit LED display shows set values for uncovered, covered and trip settings, allowing simple set-up and adjustment. A set of voltagefree changeover relay contacts are actuated when the level of the material in the container reaches the probe. The unit incorporates a unique power shield which automatically compensates for material build-up around the probe and on the sides of the container, preventing false indication. The solid state electronics are housed in a weatherproof, flame retardant, glass-reinforced nylon enclosure. The Auto-Set flush probe is top or side mountable, and the probe inserts 1 to 2 inches into a tank or spouting, has no moving parts and is made from 1/4 inch 316 stainless steel plate. It can be used with container walls up to 1 inch thick. ATEX Approved Versions Available FEATURES ► High and Low Level Indication ► Multi-Voltage (AC / DC) ► Low Profile Applications ► 316 Stainless Steel Probe ► Fail-Safe ► Push Button Calibration ► Digital Display & Internal Timer ► Power Shield Compensates for Material Build-Up on Probe PART NUMBERS/ACCESSORIES ► ATS7V0FC-FP Auto-Set Flush Probe Detailed specification, wiring diagrams and installation/operating instructions available upon request. 4B COMPONENTS LIMITED 625 Erie Avenue, Morton, IL 61550 USA Please refer to instruction manual for correct installation. Information subject to change or correction. Sept 2013

Open the catalog to page 1

Auto-Set Flush Probe - Radio Frequency (RF) Capacitance Plug Switch - 2

Product Datasheet Auto-Set™ Flush Probe Ground Connection Probe Power Shield OTHER MODELS AVAILABLE Standard Auto-Set with Power Shield for Walls up to 14.5 Inches Thick. Remote Version for High Temperature (482°F) and Vibration Applications. Auto-Set Remote A - Calibrate / Park Switch B - LED Display C - Auto / Manual Calibration Switch High / Low Failsafe Switch D - Sensitivity and Timer Buttons E - Power, Calibrating & Output LEDs TECHNICAL SPECIFICATIONS Auto-Set™ Flush Probe RF Capacitance Plug Switch ATS7V0FC-FP Power Supply: 120/240 VAC or 24 VDC (Universal Supply) Operating...

Open the catalog to page 2