Product Information BRAIME AUE 400 ROTATION CONTROL MODULE • The rotation control module AUE 400 is designed to be used with a shaft encoder, a wheel encoder or a proximity sensor to detect a speed. • Three speed ranges are available on the module: 1- 10 RPM, 1- 100 RPM & 1- 1000 RPM. The selection is done with a connection to the bornier (?) . Other speed ranges are available from 0,01 to 20 000 RPM. • Under normal working conditions the output contact is powered; if the speed reduces below the one specified, the contact falls. • A 10 second start-up delay is available if needed. • A copy of the entry signal is available for connection to another module or another speed monitoring system. OPTIONS Rotech Encoder for difficult environments Encoding Wheel Rotech Whirligig WG2A-BR for explosive environments & Mag-Con Whirligig Heavy duty in stainless steel Tacho Detailed specification, wiring diagrams and installation/operating instructions available immediately upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. July 2007. 4B BRAIME ELEVATOR COMPONENTS LTD Hunslet Road, Leeds, LS10 1JZ, UK Tel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 [email protected] www.go4b.com

Product Information AUE 400 BRAIME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 supply NO common NF delay 10 seconds entrée AC 0-100 RPM 0-1000 RPM 0 VDC signal 12 VDC + - 220/240 VAC 110/120 VAC 50/60 HZ 50/60 HZ RELAY OUTPUT 250 VAC / 30 VDC 5 A CONNECTION FOR START-UP TIMER ENTRY TYPE W ONLY CONNECTION TO DETERMINE THE SPEED RANGE ENTRY SIGNAL COPY OF SIGNAL IP 50 Temperature - 10°C to + 50°C Dimensions: width 55 height 75 depth 130 mm Reference AUE 4XX XX corresponds to the number of pulsations per rotation Example AUE408 - for 8 impulsions per rotation ROTECH ENCODER ENCODING WHEEL WHIRLIGIG WGHD...