Catalogs >
4B Braime Components >
ADB bearing temperature tester

ADB bearing temperature tester
2Pages

Catalog excerpts

Product Datasheet BRAIME ADB Bearing Sensor Tester ADB Bearing Sensor Tester Adjustable Depth Bearing Temperature Tester NEW PRODUCT APPLICATION The ADB Sensor Tester has been designed to test 4B adjustable depth bearing (ADB) style temperature sensors in the field. This hand held test unit features an integrated heating block specifically designed to have a 4B ADB sensor directly inserted. With integral controls and temperature display, the unit heats the sensor to the desired trip point, and allows quick and easy real life testing of the sensor and temperature monitoring system. METHOD OF OPERATION During planned maintenance or periodic testing, the ADB Sensor Tester can be used as a diagnostic tool to verify the alarm and shutdown sequences of the control unit are functioning as expected. To test, the heater block should be set above the control units alarm operating temperature. Remove the ADB bearing sensor probe from the housing and insert it into the heater block. As the heater block reaches the alarm temperature, the ADB sensor will relay this data to the control unit, allowing you to verify that the alarm and shutdown sequences run as expected. ADB Bearing Sensor FEATURES ► Hand Held Portable Unit ► Exact Alarm Point Testing ► Exact Shutdown Point Testing ► Easy To Read Display PART NUMBERS ► ADBT1 ADB Bearing Sensor Tester (°F Display) ► ADBTC1 ADB Bearing Sensor Tester (°C Display) ADB Hand Held Test Unit 4B COMPATIBLE SENSORS & ACCESSORIES ► ADB810V3AI/D2 Adjustable Bearing Temperature Sensor – 50mm Probe ► ADB810V3AI Adjustable Bearing Temperature Sensor – 100mm Probe ► ADB810V3AI/D8 Adjustable Bearing Temperature Sensor – 200mm Probe ► Compatible with all other ADB Series Bearing Temperature Sensors from 4B Components Information subject to change or correction. Jan 2013 4B BRAIME ELEVATOR COMPONENTS LIMITED - Hunslet Road, Leeds LS10 1JZ, UK Tel: +44 (0)113 246 1800 Fax: +44 (0)113 243 5021 Email: 4b-uk@go4b.com www.go4b.com

Open the catalog to page 1

Product Datasheet ADB Bearing Sensor Tester BRAIME DIMENSIONS 50 mm 125 mm 210 mm ADB Probe Removed From Housing ADB Probe Inserted Into Heater Block TECHNICAL SPECIFICATIONS ADB Bearing Temperature Tester Supply 1 (Heater Block) Supply 2 (Display) Temperature Control Range Temperature Control Resolution Display Power On / Off Four - AA Batteries (Rechargeable NiMH Recommended) Two - 9 Volt Batteries (Rechargeable NiMH Recommended) Ambient to 230ºF (ADBT1) or 110°C (ADBTC1) 10ºF (ADBT1) or 5ºC (ADBTC1) Green LED Display Showing Testing Set Temperature The Unit Is Powered On / Off By The Top...

Open the catalog to page 2