Catalogs >
4B Braime Components >
4B VIBMIL vibration sensor

4B VIBMIL vibration sensor
2Pages

Catalog excerpts

Product Datasheet PRODUCT DATASHEET VIBMIL VIBMIL Vibration Sensor APPLICATION VIBMIL is a vibration sensor designed for continuous monitoring of vibration levels in industrial environments. It is current loop powered accelerometer and delivers accurate vibration RMS velocity using a 420 mA output. Built with a stainless-steel enclosure, including a 3/4” NPT thread for conduit connection. The VIBMIL can be supplied with optional inbuilt NTC or PT100 temperature sensors. The VIBMIL is equipped with female 1/4”-28 UNF female mounting thread, allowing the use of a screw, stud, or mounting stud to secure the sensor to the desired application. The sensor is supplied with a 1/4”-28 UNF set screw as standard. Optional converters to M8 and M6 male threads are available. To achieve maximum sensitivity, mount the sensor vertically along the Y-axis of the machinery. To ensure accurate readings and proper functioning of the VIBMIL, securely fix it to a level surface during installation. Implement the 2 wire, loop powered accelerometer into the desired control system and measure the linear output from 4 – 20mA proportional to the sensors measuring range. compact, IP66 Stainless Steel enclosure RMS velocity in mm/s ► Measuring range 0-25 mm/s standard, and 0-50 mm/s special request. ► Can also monitor surface temperature with optional NTC or PT100 temperature sensor ► 2 wire 4-20mA loop powered sensor ► 3/4” NPT conduit fitting ► 1/4” – 28 Female UNF mounting thread. ► ATEX, IECEx, UKEx Zone 20 Approved ► Class II Div 1 Approved ► Monitors - VIBMIL Vibration Sensor 1/4"-28UNF – No Temp. - NRTL / ATEX / IECEx / UKEx ► VIBMIL21NV4CAI - VIBMIL Vibration Sensor 1/4"-28UNF - NTC Temp. Sensor - NRTL / ATEX / IECEX / UKEx ► VIBMIL21PV4CAI - VIBMIL Vibration Sensor 1/4"-28UNF - PT100 Temp. Sensor - NRTL / ATEX / IECEX / UKEx ► VIBMILM6 - VIBMIL 1/4”-28 UNF Male to M6 Male thread Adaptor ► VIBMILM8 - VIBMIL 1/4”-28 UNF Male to M8 Male thread Adaptor Copyright © 2023 4B Group. All rights reserved. Information is subject to change or modification without notice. Refer to instruction manual for installation information. CRD09

Open the catalog to page 1

Product Datasheet PRODUCT DATASHEET VIBMIL DIMENSIONS WIRE DESCRIPTION TECHNICAL SPECIFICATIONS Power Supply Power Dissipation Measuring Range • 0 – 25 mm/s RMS Velocity (VIBMILx1xVxx) • 0 – 50 mm/s RMS Velocity (VIBMILx2xVxx) (Depending on the model) Frequency Range 4 – 20 mA proportional to Measuring Range Maximum Load 600 Ohms at 24 VDC Supply Voltage Optional Temp Sensor Power-on Time Operating Temp Mounting Thread 1/4”-28 UNF female thread (supplied with 1/4”-28 UNF set screw) Mounting Torque Housing Material Stainless Steel 3m (9.8 ft) long, with 2 or 4 cores 24 AWG ATEX, IECEx, UKEx...

Open the catalog to page 2