GRAIN & FEED INDUSTRY SOLUTIONS A Worldwide Manufacturer of High Quality, Technologically Advanced Material Handling & Electronic Components

Steel/Stainless Steel HDP/Nylon/Polyurethane Steel/Stainless Steel HDP/Nylon/Polyurethane • Higher capacity: up to 100% capacity increase for existing elevators • More flexibility: operates effectively over a wide speed range SUPER STARCO™ (SPS) • Versatile bucket, available in many sizes • Increased Volume, with the same discharge characteristics as the Starco™ bucket • Less buckets required per metre • Less bolts and punching required • Reduced cost for belt & bucket installation CC-S® Stackable design saves freight and storage costs Maximum impact resistance Thickest front lip in the grain...

ELEVATOR BUCKETS STEEL BUCKETS J TYPE (American Grain) Steel, Stainless Steel • High capacity: Wingless design, improves fill and allows closer spacing on belt • Greater strength/longer life: Solid seamless construction with rounded corners for rigidity. No welds or joints to open up • Fully interchangeable with CC style buckets • Supplied complete with standard recessed holes • Ideal for free flowing materials on medium speed elevators Steel, Stainless Steel • For sticky materials at slow speeds • For free flowing materials at higher speeds and closer spacing Steel Steel, Stainless Steel GB...

BOLTS & BELTS ELEVATOR BOLTS EURO BOLTS • Manufactured to approx. DIN15237 • ISO grade 5.8 (exceeds DIN15237) • Large bolt head diameter • Fully threaded • Available as zinc plated or stainless • Alternative choice of packings: - Bolt, hex nut & domed washer boxed/100 - Bolt only, bulk packed in bags FANG BOLTS • Unique Design – fangs bite into belt, locking bolt in place while nut is tightened • Eases fitting and removal of nut • Large bolt head diameter = maximum resistance to pull through • Flat bolt head – pulls fully flush into belt reduces risk of rip out of bolt due to head protruding...

ELEVATOR BELTING 4B elevator belting is of laminar construction, to give high impact resistance coupled with low stretch at working tension. The EP carcass comprises a woven textile construction having low stretch polyester fabric warp (along its length) and impact resistant polyamide fabric weft (across the width). The low stretch characteristics of the belt are achieved using the high strength textile fabric which is pre-tensioned during the manufacturing process. This process limits the maximum stretch in the belt, at working strength, to 1.5%. SBR Low stretch elevator belting -abrasion resistant...

CHAINS DROP FORGED CHAIN & SPROCKETS 4B’s drop forged chain is made of special heat treated alloy steel, case hardened to Rockwell C57 - C62 with a ductile core hardness of Rockwell C40. 4B’s superior heat treatment technique provides the optimum chain link with a more resilient ductile core for shock resistance, and an extremely hard exterior surface for superior wear resistance. 4B’s drop forged chain is backed by an international network of companies with over 135 years of experience, and a global team of engineers and sales professionals that can provide you with practical solutions for all...

BOLT-N-GO™ DRAG CHAINS PATENTED Bolt-N-Go is the most practical drag conveyor chain solution in the Feed and Grain industry. No other conveyor chain is as easy to install, inspect and repair. Bolt-N-Go chain is constructed with high-strength, lightweight, drop forged, heat-treated links and connecting pins. It uses flexible, resilient, and wear-resistant nylon paddles that attach directly to the links with hex bolts, washers and lock nuts. No welded steel backer flights are necessary. This unique chain construction brings valuable benefits to feed and grain operations. Bolt-N-Go Chain BENEFITS:...

HAZARD MONITORING Bucket Elevator Chain Conveyor Enclosed Belt Conveyor 1) Belt/Chain Speed 2) Bearing Temperature Typical Sensor Placements Open Belt Conveyor 4) Plug / Level Indication 5) Surface Temperature 6) Slack Chain Detection 7) Gate Position 8) Vibration WATCHDOG SUPER ELITE • Sensor Interface for PLC’s & Automation Systems • Supports PROFINET, EtherNet/IP, and Modbus TCP/IP protocols • Up to 16 Total Sensor Inputs with Available Expansion Boards • Configurator Software for Easy Network Set Up and Visual Overview of All Devices • Hazardmon.com cloud based monitoring compatible • International...

HAZARD MONITORING IE-GuardFlex Distributed Hazard Monitoring Solution The IE-GuardFlex is the central control unit for 4B’s Distributed Hazard Monitoring Solution (DHMS). Using industrial Ethernet technology, the IE-GuardFlex controller connects to, and monitors multiple machine mounted sensors via 4B’s class leading IE-Nodes. The complete IE-GuardFlex system can be configured to support multiple machines, IE-Nodes and sensors, and will interface directly to the machine MCC’s to perform a controlled stop in the event of the detection of a hazardous condition. The IE-GuardFlex system is typically...

Adjustable sensor depth International dust hazard approved to Zone 20 SENSORSMilli-Temp Series 4-20mA Loop-powered analogue sensor Single Body Design Small Probe Diameter Allows Easy Grease Flow International dust hazard approved to Zone 20 • Screw in positive mount installation • Grease zerk for bearing lubrication • International dust hazard approved to Zone 20 WDB7 Lug Style • Surface mount installation • Continuous temperature monitoring • Pt-100 4-wire RTD PTC (trip temperature selected at time of purchase) • International dust hazard approved to Zone 20 • Surface mount installation • NTC...

SENSORS SPEED SENSORS Whirligig • Combination target, bracket and guard for simple sensor installation • Suitable for all 4B sensors & other standard inductive proximity sensors • Not affected by shaft or machine vibration • Easy to install, safe, and reliable • Optional magnetic Mag-Con™ simplifies mounting • Signals underspeed conditions for bucket elevators, conveyors and all rotating machinery • Signals underspeed for bucket elevators, conveyors and all rotating machinery • Inductive proximity sensor detects rotating metal target • Simple magnetic calibration • International dust hazard approved...