MISC. FLEXURAL TESTING RP5 PSE – Polystyrene infillor block Standards: EN 15037 Developed in cooperation with the polystyrene producers association, the RP5 PSE is already equipping more than 30 plants producing Polystyrene infillor blocks. The Jack position can be adjusted upon 2 axis and, complying with the EN 15037 , the supporting elements simulate the side compression thanks to wire suspended weights. RP 80 B - RP 150 B - Kerbstones Standards: EN 1340 Our kerbstone testing machines exists in two versions (80 kN and 150 kN), both, as a result of our focus on ergonomics, equipped with roller tables (not shown here), as well as a centring device that helps installing the kerbstone and spares the operator a lot of handling time. Aimed for pre-stressed or reinforced concrete beam producing factories, our machine allows one operator to run the different tests in an automatic modus, including the load stages prescribed by the EN 15037-1.