Support 8/16 RS-232/485/422 3IN1 serial port to 1/2 10/100Base-T(X) self-adaptive Ethernet interface Support two schemes, single or double network ports Support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes Support 85~265VAC wide voltage input Support wide operating temperature r

Introduction Products of NP3008T & NP3108 & NP3016 & NP3116 series are serial device servers that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series has 10 products to choose from, support 8/16 RS-232/485/422/3IN1 serial port to 1/2 100M Ethernet port, support single network port or dual network port two schemes, support optional 85~265VAC single power supply or dual power supply. It adopts rack mounting, which can meet the requirements of different application scenes. Serial device server...

Support serial port status and parameters monitoring, ensuring the communication status be clear at a glance Support RTS/CTS, DTR/DSR and XON/XOFF flow control Compatible with various virtual serial port management software Support virtual serial port drive access mode and automatic connection recovery after network interruption Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation Support standard TCP/IP SOCKET application access TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously...

Specification Standard: 10Base-T, 100Base-TX Protocol: TCP, UDP, ARP, HTTP, TELNET, ICMP, DHCP, DNS Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface form: RJ45 Ethernet Interface quantity: 1 or 2 Duplex mode: Self-adaptive Full/Half Duplex Mode Operating mode: 4 sessions, support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang and UDP Multicast operating modes Standard: EIA RS-232C, RS-485, RS-422 Quantity of serial port: 8/16 RS-232, RS-485/422 or 3IN1 serial port RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD Serial Port...

Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 2bit Interface form: RS-485/422 serial port with isolation, adopt 5-pin 5.08mm pitch terminal blocks; RS-232, 3IN1 serial port, adopt RJ45; Flow control: RTS/CTS, DTR/DSR, XON/XOFF Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC) Load capacity: RS-485/422 end supports 32 points polling (customizable 128 points) Transmission distance: RS-232, 15m; RS-485/422, 1200m Pull high/low resistor for RS-485: 4.7kΩ Intensity of electromagnetic isolation: RS-485/422 serial port (terminal block),1.2kVAC Configuration...

Installation: rack mounting Dimension (W x H x D): 441.6mm×44.6mm×207.9mm Weight: ≤2620g IEC 61000-4-2 (ESD, electrostatic discharge), Level 3  IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3  Industrial Standard IEC 61000-4-5 (Surge), Level 2  Power supply: common mode±1kV, differential mode±1kV Signal: common mode ±1kV, differential mode ±1kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Certification Warranty

Ordering Information 100M Available Models Copper port Power Supply Address: 3/B, Zone 1, Baiwangxin High Technology Industrial Park, Song Bai Road, Nanshan District, Shenzhen, 518108, China TEL.: +86-755-26702668 ext 835 FAX: +86-755-26703485 E-mail: [email protected] Website: www.3onedata.com Please scan our QR code for more details *Product pictures and technical data in this datasheet are only for reference. Updates are subject to change without prior notice. The final interpretat