Website:
3onedata Co.,Ltd.
Group: 3onedata Co.,Ltd.
Catalog excerpts
Make network communication more reliable MODEL7211A Series Desktop Installation 1 100M Ethernet Copper Port to 1 E1 Network Bridge • Support data conversion between 1 100M copper port and 1 E1 port • Support local clock and clock setting recovery • Support VLAN long data packet • Support Ethernet 10M/100M rate and full/half duplex setting • Two optional power supplies: 220VAC or -48VDC Your Reliable Industrial Communication Expert 3onedata Co.,Ltd.
Open the catalog to page 1
Introduction MODEL7211A Series are cost effective Ethernet E1 network bridges that can implement Ethernet data transmission through E1 port. This series have 2 types of products and provides 1 100M Ethernet copper port and 1 E1 port, supports 220VAC or -48VDC. It adopts desktop mounting to meet the requirements of different scenes. The DIP switch provides device impedance option, Ethernet port configuration, clock option, loopback test, etc. Hardware adopts fanless, low power consumption, wide temperature range design, and can be widely used to meet network requirements like extending and...
Open the catalog to page 2
Your Reliable Industrial Communication Expert Specification Interface Protocol Standard: aligns with the recommendation of ITU-TG.703 Output Jitter Transfer: aligns with the recommendation of ITU-TG.735 Input Jitter Tolerance: aligns with the recommendation of ITU-TG.823 Output Jitter: meets the recommendation of ITU-TG.823 Interface quantity: 1 E1 port E1 Port Line Rate: bidirectional 2.048Mbps synchronized data Transmission Distance: 2Km Clock Recovery Accuracy: ±50ppm Interface Code Pattern: HDB3 Frame Format: un-framing CRC Check: No Clock Frequency: 2.048MHz Interface Connection: BNC,...
Open the catalog to page 3
(RJ45,) Interface Protection: 1500V Electromagnetic isolation Standard: IEEE802.3 for 10Base-T IEEE 802.3u for 100Base-TX Interface Rate: 10/100Mbps Line Code: Manchester code Duplex Mode: full/half duplex Ethernet Port Interface Connection: RJ45 Transmission Distance: 100m Interface Protection: 1500V Electromagnetic isolation Connection Cable: connect to PC through crossover cable; connect to HUB/SWITCH through straight through cable
Open the catalog to page 4
Your Reliable Industrial Communication Expert Address: 3/B, Zone 1, Baiwangxin High Technology Industrial Park, Song Bai Road, Nanshan District, Shenzhen, 518108, China TEL.: +86-755-26702668 ext 835 FAX: +86-755-26703485 E-mail: ics@3onedata.com Website: www.3onedata.com < Please scan our QR code for more details *Product pictures and technical data in this datasheet are only for reference. Updates are subject to change without prior notice. The final interpretation right is reserved by 3onedata.
Open the catalog to page 5All 3onedata Co. catalogs and technical brochures
-
3onedata Fiber Modem Flyer1 Pages
-
ICS5028G-4XGS-8GC Flyer1 Pages
