Catalogs >
3onedata Co.,Ltd. >
3onedata | MC201 | 1-port CAN Bus to Fiber Converter

3onedata | MC201 | 1-port CAN Bus to Fiber Converter
5Pages

Catalog excerpts

3onedata | MC201 | 1-port CAN Bus to Fiber Converter - 1

3onedata Make network communication more reliable Wall Mounting 1 CAN to Fiber MODEM • Support 1 CAN port to 1 fiber port • CAN port supports two options for choosing baud rate, automatic detection and user definition. The range of baud rate is 2.5kbps-1000kbps • Data receiving/storing/forwarding could be achieved between 2 CAN networks with different rates when used in pairs • It can extend CAN bus transmission distance, the transmission distance of fiber port can reach up to 15km • Support -40 ~ 75°C wide operating temperature range Your Reliable Industrial Communication Expert

Open the catalog to page 1

3onedata | MC201 | 1-port CAN Bus to Fiber Converter - 2

Your Reliable Industrial Communication Expert MC201-F is a CAN bus signal to optical signal converter. It’s specially designed for solving problems like short transmission distance and electromagnetic interference during CAN bus transmission. It supports 1 CAN port to 1 fiber port transparent transmission and adopts wall mounting which can meet the requirements of different scenes. DIP switch could implement baud rate setting of CAN port. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for...

Open the catalog to page 2

3onedata | MC201 | 1-port CAN Bus to Fiber Converter - 3

Your Reliable Industrial Communication Expert Interface form: SC/ST/FC Transmission distance: • multimode: 2km • single mode: 15km Optical cable: • multimode: 50/125pm or 62.5/125pm • single mode: 8.3/125pms 8.7/125pms 9/125pm or 10/125pm Fiber Port Transmission wavelength: • multimode: 1310nm • single mode: 1310nm or 1550nm Standard: CAN2.0A, CAN2.0B CAN signal: CANH, CANL, GND Duplex mode: 2-wire Half Duplex Mode Baud rate: 2.5kbps-1000kbps CAN Interface Load capacity: support concurrent transmitting of 110 nodes Transmission distance: 40m~10km Interface form: adopt 5-pin 5.08mm pitch...

Open the catalog to page 3

3onedata | MC201 | 1-port CAN Bus to Fiber Converter - 4

Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Honor- Quality • Service

Open the catalog to page 4

3onedata | MC201 | 1-port CAN Bus to Fiber Converter - 5

Your Reliable Industrial Communication Expert Address: 3/B, Zone 1, Baiwangxin High Technology Industrial Park, Song Bai Road, Nanshan District, Shenzhen, 518108, China TEL.: +86-755-26702668 ext 835 FAX: +86-755-26703485 E-mail: ics@3onedata.com Website: www.3onedata.com Please scan our QR code for more details *Product pictures and technical data in this datasheet are only for reference. Updates are subject to change without prior notice. The final interpretation right is reserved by 3onedata.

Open the catalog to page 5