Catalog excerpts
IMF2100 Series DIN-Rail Mounting 1/2 Fiber Ports +1 RS-232/485/422 Serial to Fiber MODEM • Support 1/2 fiber ports and 1 RS-232/485/422 serial port with isolation • Support 1 relay alarm output for power failure and disconnection of fiber optics • Support multiple optional power solutions including 85~265VAC, 110~370VDC or 12-48VDC (single/dual power supply) • Support -40 ~75°C wide operating temperature range Your Reliable Industrial Communication Expert
Open the catalog to page 1
Introduction IMF2100 series are 1/2 fiber ports + 1 RS-232/485/422 serial to fiber MODEM. They convert RS-232/485/422 serial port signal to optical signal and provide users with RS-232/485/422 serial port to implement transparent end-to-end transmission. This series provide 1 or 2 fiber ports with ring network function, 1 RS-232/485/422 serial port and multiple optional power solutions like 85~265VAC, 110~370VDC or 12-48VDC (single/dual power supply). They adopt DIN-Rail mounting, which can meet the requirements of different scenes. The DIP switch could implement functions like Master/Slave...
Open the catalog to page 2
Your Reliable Industrial Communication Expert Specification Interface quantity: 1/2 (support ring network) Fiber port: optional SC/FC/ST interface Transmission distance: • Multimode: 2km Fiber Port • Single mode: 20/40/60km Transmission wavelength: • Multimode: 1310nm • Single mode: 1310nm or 1550nm Standard: EIA RS-232C, RS-485, RS-422 Serial port: 1 RS-232/485/422 serial port, can't be used simultaneously RS-232 signal: RXD, TXD, GND RS-485 signal: D+, D-, GND Serial Port RS-422 signal: T+, T-, GND, R+, R- Baud rate: 300~115200bps Data bit: 5bit, 6bit, 7bit, 8bit Stop bit: 1 bit, 1.5bit,...
Open the catalog to page 3
Direction control: RS-485 adopts automatic data flow control technology Load capacity: RS-485 supports 32-point polling environment (128-point could be customized) RS-485 pull up/down resistor: 4.7kQ RS-485 terminal resistance: built-in 120Q, could be controlled by DIP switch Transmission distance: RS-232 serial port, 15m ; RS-485/422 serial port, 1200m Relay quantity: 1 relay alarm output Connection method: 6-pin 5.08mm pitch terminal block(relay Relay occupies 2 pins) Current load: 1A@30VDC, 0.3A@125VAC Default relay status: normally open Power Supply Indicator, Fiber Port Connection...
Open the catalog to page 4
Solution 4 • Power supply range: 85~265VAC • Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins) • Power supply protection: built-in 2.0A over-current protection No-load: <3.0W@24VDC Power Consumption Full-load: <3.4W@24VDC Operating temperature: -40~75°C Environmental Limit Storage temperature: -40~85C Relative humidity: 5%~95%(no condensation) Housing: IP40 protection, metal Installation: DIN-Rail mounting Physical Characteristic Weight: <360g Dimension (Wx H x D): 35mmx110mmx95mm IEC 60950-1 / EN 60950-1: Safety EN 55032: Conducted & Radiated Disturbances...
Open the catalog to page 5
Your Reliable Industrial Communication Expert Address: 3/B, Zone 1, Baiwangxin High Technology Industrial Park, Song Bai Road, Nanshan District, Shenzhen, 518108, China TEL.: +86-755-26702668 ext 835 FAX: +86-755-26703485 E-mail: ics@3onedata.com Website: www.3onedata.com Please scan our QR code for more details *Product pictures and technical data in this datasheet are only for reference. Updates are subject to change without prior notice. The final interpretation right is reserved by 3onedata.
Open the catalog to page 6All 3onedata Co. catalogs and technical brochures
-
3onedata Fiber Modem Flyer1 Pages
-
ICS5028G-4XGS-8GC Flyer1 Pages
