Catalog excerpts
GW1102-2D(RS-485)-TB-P(12-48VDC) Wall Mounting 2 RS-485/422 + 1 100M Ethernet Port Modbus Gateway Support 2 RS-485/422 serial ports and 1 10/100Base-T(X) self-adaptive Ethernet interface Support conversion between Modbus RTU/ASCII and Modbus TCP protocol Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes Support virtual and real ID mapping to achieve flexible access between Master and Slave devices Support 12~48VDC power supply input Support -40~75℃ wide operating temperatu
Open the catalog to page 1
Introduction GW1102-2D(RS-485)-TB-P(12-48VDC) is Modbus gateway designed for integrating Modbus RTU/ASCII and Modbus TCP networks; it can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This product has 2 RS-485/422 serial ports and 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes. Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, SSH， SMTP, SNTP， DNS and DHCP protocols. It possesses complete management function, and supports access...
Open the catalog to page 2
File management is convenient for the device rapid configuration and online upgrading SSHD and HTTPS can guarantee the access security of data Conduct network diagnosis and troubleshooting via Ping and Traceroute Support multiple alarm methods, including e-mail alarm, log alarm and SNMP Trap alarm Specification Standard: 10Base-T, 100Base-TX Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS Ethernet Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 1 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaption Serial Port...
Open the catalog to page 3
Quantity of serial port: 2 RS-485/422 serial ports RS-485 signal: D+, D-, GND RS-422 signal: T+, T-, GND, R+, RBaud rate: 110~115200bps Data bit: 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 2bit Interface form: adopt 10-pin 5.08mm pitch terminal blocks Directional control: RS-485 direction adopts Automatic Data Direction Control technology Pull high/low resistor for RS-485: 4.7kΩ Electromagnetic isolation strength: 3KVDC/2KVrms Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave Connection quantity: support up to 256 Modbus TCP client (master)...
Open the catalog to page 4
IEC 6100044 (EFT, electrical fast transient pulses), Level 3 Power supply: common mode±2kV, differential mode±1kV Signal: common mode±2kV, differential mode±1kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068- 2- 6 Certification Warranty
Open the catalog to page 5
Ordering Information Available Models Power Supply Address: 3/B, Zone 1, Baiwangxin High Technology Industrial Park, Song Bai Road, Nanshan District, Shenzhen, 518108, China TEL.: +86-755-26702668 ext 835 E-mail: ics@3onedata.com Website: www.3onedata.com Please scan our QR code for more details *Product pictures and technical data in this datasheet are only for reference. Updates are subject to change without prior notice. The final interpretation right is reserved by 3onedata.
Open the catalog to page 6All 3onedata Co. catalogs and technical brochures
-
3onedata Fiber Modem Flyer1 Pages
-
ICS5028G-4XGS-8GC Flyer1 Pages
