video corpo

6000-series-full-face-mask-respirator-datasheet
4Pages

{{requestButtons}}

Catalog excerpts

6000-series-full-face-mask-respirator-datasheet - 1

3 6000 Series Full Face Respirators Data Sheet Main Features The 6000 Series Full Face Respirators are used with twin lightweight filters which are fitted by a simple bayonet attachment system, providing an economical and flexible choice. The Respirators can also be used with the 3M S-200 Supplied-Air System for increased convenience and flexibility. • Lightweight and well balanced • Flexible system (gas / vapour and / or particulate filters plus Supplied-Air option) • Silicone facepiece material • Easy to use • Wide field of vision and impact resistance with a polycarbonate lens. • 3 sizes (6700 - small, 6800 - medium, 6900 - large) • Low maintenance • Economical • Spectacle kit available Gas/Vapour FILTER Organic Vapours - Anywhere conventional paints are used (subject to usage conditions) - Vehicle manufacture - Aircraft manufacture and refurbishment - Boat building - Ink and Dye manufacture and use - Adhesive manufacture and use - Paint and varnish manufacture - Resin manufacture and use - Manufacture and Maintenance of refrigeration equipment - Agrochemicals Organic Vapours, Inorganic and Acid Gases As 6051 but also: - Electrolytic processes - Acid Cleaning - Metal Pickling - Metal Etching Organic Vapours, Inorganic Gases, Acid Gases and Ammonia Applications The 6000 Series full facepieces can be used with a variety of different filter / product options : • Gas and vapour filters - The 6000 Series filters fit directly onto the 6000 Series full facepieces. • Particulate filters - The 2000 Series, 6035 and 6038 particulate filters fit directly onto the 6000 Series full facepiece. The 5911/5925/5935 particulate filters may be used on their own with platform 603 & retainer 501. • A combination of gas / vapour and particulate filters - The 5911 / 5925 / 5935 particulate filters can be used with 6000 Series gas / vapour filters using retainer 501. • Supplied-Air mode using the 3M S-200 Respirator System (For information on the Supplied-Air System and applications please see the 3M S-200 Data Sheet). 6075 Organic (A1) + For- Vapours maldehyde and Formaldehyde As 6051 but also : - Hospitals and Laboratories 6096 HgP3 Mercury and Laboratories and particulate particulates applications 6098 (AXP3) Organic - Chemical Industry Vapours (boiling below 65°C) and Particulates Organic Vapours, Inorganic Gases, Acid Gases and Ammonia The table below lists the filters and typical industrial applications.

Open the catalog to page 1
6000-series-full-face-mask-respirator-datasheet - 2

Particulates FILTER Particulates (Fine Dusts and Mists) - Pharmaceutical / Powdered Chemicals - Construction / Quarrying - Ceramics / Refractory Materials - Foundries - Agriculture - Woodworking - Food Industry Particulates and nuisance levels of Organic Vapours and Acid Gases Particulates, Hydrogen Fluoride Gas up to 30ppm and relief from Ozone, Organic Vapours and Acid Gases below WEL - Welding - Paper Industry - Brewing - Chemical Processing - Typical Smog - Inks and Dyes Aluminium Agriculture Pharmaceutical Welding Correct Usage The 6000 Series full facepieces when fitted with 6000...

Open the catalog to page 2
6000-series-full-face-mask-respirator-datasheet - 3

Fitting Instructions For cleaning after use the 3M 105 face piece cleaner can be used Fitting instructions must be followed each time the respirator is worn. • Disassemble by removing the filters and nose cup. • The centre adapter, lens and faceseal can also be removed if necessary. • Clean and sanitise the facepiece (excluding cartridges and filters) by immersing in warm cleaning solution and scrub with soft brush until clean. Parts may also be cleaned in a washer. Note : Water temperature should not exceed 50°C. Do not use cleaning agents that contain lanolin or other oils. 1. Fully...

Open the catalog to page 3
6000-series-full-face-mask-respirator-datasheet - 4

3M Spare Parts and Accessories Part No. Use Limitations 1. These respirators do not supply oxygen. Do not use in oxygen deficient atmospheres * Exhalation valve Inhalation valve Head harness assembly Lens covers (100 pack) Neck strap Assembly 2. Do not use for respiratory protection against atmospheric contaminants which have poor warning properties, are unknown or immediately dangerous to life and health or against chemicals which generate high heats of reaction with chemical filters. (The 3M S-200 Supplied-Air Respirator System can be used against contaminants with poor warning...

Open the catalog to page 4

All 3M catalogs and technical brochures

  1. OX Series

    2 Pages

  2. 1000 Series

    3 Pages

  3. 4532+

    3 Pages

  4. LABCoat 4440

    1 Pages