TDS Rev 1.0 Technical Data Sheet: CarbonX™ 20% Carbon Fiber PEEK 3D Printing Filament Physical Properties Density Mechanical Properties Tensile Strength, Break Tensile Modulus Tensile Elongation, Break Flexural Strength Flexural Modulus Thermal Properties Glass Transition Temperature (Tg) Heat Deflection Temperature at 1.8 MPa Typical Value Unit Ohm/sq Electrical Property Surface Resistance Printed Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 420°C Bed Temp: 140°C Specimen Orientation: XY Flat Disclaimer: The technical data contained on this data sheet is furnished without charge or obligation and accepted at the recipient’s sole risk. This data should not be used to establish specifications limits or used alone as the basis of design. The data provided is not intended to substitute any testing that may be required to determine fitness for any specifi